New to DWG? - Sign Up for immediate access to dealer pricing and benefits.
Already a DWG Customer? - Sign In to view pricing.
EIA compliant 19" PowerCool Rackmount power distribution and cooling unit shall be Middle Atlantic Products model # PDCOOL-1020RK, with a 20 amp capacity, 2 stage, normal mode (Line to Neutral) spike and surge suppression with dry contact and LED status indicators and EMI filtering. PowerCool shall activate at 87°F (30.5°C), reach full speed at 95°F (35°C) and switch off at 85°F (29.4°C). PowerCool shall displace 50 CFM with a maximum decibel level of 29 dB (measurements made 1 meter from source, centered horizontally and vertically). PowerCool shall operate at a static pressure of .031 in. H20. PowerCool shall have a removable 10" temperature probe. PowerCool shall have a normally open contact closure for remote surge suppression status notification to customer supplied monitoring device shall operate on 120 volt AC/60Hz nominal power. PowerCool shall have a removable 6' 20A (14-3) IEC SignalSAFE™ power cord with IEC C-20 receptacle. PowerCool shall have 0 front and 10 NEMA 5-20R outlets, and keyswitch located on the front of the unit. "Clean ground" surge suppressor design shall not pass noise contamination to the ground. PowerCool shall occupy one rackspace with a flat black finish. PowerCool shall comply with the requirements of RoHS EU Directive 2002/95/EC. PowerCool shall be manufactured by an ISO 9001 registered company. PowerCool shall be warrantied to be free from defects in materials and workmanship under normal use and conditions for a period of 3 years. PowerCool shall be ETL listed to UL standard 1419 in the US and CAN/CSA C22.2 #60065 in Canada.
Specifications
General Info
Assembly/Installation Information
Listing Agencies/Third Party Information
Dimensions
Cord Information
Technical Information
PDCOOL-1020RK Specifications PDF
Product Reviews
Write your own review
Rate this product: