PL3575DBR-26D Alarm Lock Electronic Proximity Mortise Lock - Regal Lever Deadbolt Function Right Hand - Satin Chrome Finish

Specifications

• Operation - Authorized Prox credential (HID card, keyfob or prox tag) allows lever to retract latch. Inside lever is always in passage mode and permits instant egress.
• Operating Temperature - Weatherproof lock with operating range from -31 degrees below to 151degrees F.
• Lock/Built-in Reader - Weatherproof and moisture sealed circuitry. Proximity antenna is housed within ultra high strength, impact resistant Lexan.
• Programming - Locking modes, event schedules, group or individual users, master and management codes, passage and emergency or service access, lockout and remote override capability and allowable entry time (3, 10 or 15 seconds), etc. are programmable via Alarm Lock DL – Windows PC Software the AL-DTM (data transfer module). Note: Lock includes 9 preprogrammed Prox Cards for initialization /programming.)
• Audit Trail - Lock's activity log can be extracted by using the AL-DTMII (data transfer module), the AL-PCI (PC interface) and/or can be on-site printer using the AL-IR1 hand-held infrared printer). (Note: Requires intermediary PC running DL-WINDOWS software.)
• Power - 5AA alkaline batteries, furnished. Audible low battery alert, visual and audible entry indicators; 60,000 cycles, typical.
• Door Thickness - 1 5/8" to 1 7/8" standard. For 1 3/8" doors use S6072 spacers. For other thickness', please consult factory.
• Backset - 2 3/4" standard. 2 3/8" backset also available.
• Door Prep - Standard ANSI A115 Series Prep modified by adding additional through-bolt holes.
• Cylinder - Solid brass 6 pin tumbler cylinder keyed 5, SCI keyway, furnished in all K.O. models. Tailpieces for Schlage HW580) & Lori (HW620) cylinders (furnished). Standard IC core models accept Arrow, Best. Falcon, KSP and Kaba Peaks 6 or 7 pin IC core cylinders (not furnished). Alarm Lock tailpiece for use with IC core cylinders is furnished. IC core models prepped for Yale, Medeco, Corbin-Russwin, Sargent and Schlage also available.
• Strike - 1 1/8" x 2 3/4" T strike standard. With screws for wood or metal jambs. 1 1/4" x 4 7/8". ASA strike also included.
• Finishes - US3 polished brass, US26D satin chrome, US26 polished chrome, US5 antique brass, plus special order finishes (including Durondic US10B).
• Compliances - Grade I heavy duty cylindrical lockset. UL listed to the 1OC Positive Pressure Specification. Latchbolt is UL listed and 3-hour fire rated. FCC certified. ADA compliant levers.

PL3575DBR-26D Specifications PDF

PL3575DBR-26D Manual