TR560 Nitek Video Link Receiver Only Selectable 100ft to 1500ft

Live video transmission for operation over twisted pair or Cat 5 cables.

Both the TR515 and TR560 are designed for operation over Category 2, 3, 4 or 5 twisted pair cable and require the use of a NITEK transmitter unit. The units work equally well over existing communication and computer network spare pairs, or new cable installations. Advanced receiver electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with virtually no loss. A dip switch on the unit provides precise adjustment of gain and frequency compensation, allowing the system to be "fine-tuned" for any cable. This unique feature provides easy adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin, when bidding CCTV twisted pair transmission jobs.

The TR515 and TR560 include the receiver and a power supply for the receiver. Complete systems including the receiver, transmitter and power supplies are available. For more information refer to the Ordering Information section of this sheet or call NITEK.

Specifications:

• Model Number - TR560
• Size - 1.6"H x 4.3"W x 2.4"D
• Power Requirements - 12 to 24 VAC or VDC @ 30mA (wall transformer provided with unit)
• Input - Balanced low voltage current loop
• Output - 1 Vpp composite video Monochrome or Color
• Common Mode Rejection - >70dB
• Video Format - RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
• Operating Frequency - DC to 10 MHz
• Wire Size - 26 to 12 AWG Unshielded Twisted Pair
• UTP Category - Unshielded Category 2 or better
• Temperature Range - -40 degrees C to +85 degrees C
• Humidity Range - 0 to 98%, non-condensing
• Enclosure Material - Black ABS Flame Retardant Plastic
• Twisted Pair Connection - Screw Terminals

TR560 Spec Sheet