POE29U-1AT Phihong IEEE802.3at Poe Desktop C14 Gigabit

Specifications

INPUT

• AC Input Voltage Rating - 100 to 240VAC
• AC Input Voltage Range - 90 to 264VAC
• AC Input Current
  • 0.8A (RMS) maximum at 120VAC
  • 0.55A (RMS) maximum at 240VAC
• AC Input Frequency - 47 to 63Hz
• Leakage Current
  • 350uA maximum for U models
  • 250uA maximum for W models
• Max In-rush Current - 60A maximum at 240VAC and maximum load (Cold Start at ambient 25°C)

OUTPUT

• Output Power - 30W
• Hold up Time - 10mSec minimum at maximum load at 120VAC, 60Hz
• Transient O/P Voltage Protection - 60V maximum at switch on/off at any AC line phase
• Efficiency - 80% Typical at maximum load at 120VAC, 60Hz
• Environment
  • Operating Temperature - -20 to +50°C
  • Non-operating Temperature - -20 to +70°C
  • Relative Humidity - 5 to 90%
• EMI
  • EN55022 Class B
  • FCC part 15 Class B
• Isolation (HI-POT) - Primary to secondary: 1500VAC for 1 minute, 10mA
• Insulation Resistance - Primary to secondary: 10M Ohm 500VDC
• Indicator
  • Solid Green: Valid IEEE802.3af load detected and
  • connected "ON"
  • Blinking Green: Power "ON" ready for connection
  • Blinking Green/Red: Invalid load connected
  • Blinking Red/Green: fault
• AC Input Connector
  • IEC320 C14 - U Models – three wire
  • IEC320 C8 – W Models – two wire
• Output Connection - +pins 3,6 / -pins 1,2
• Data IN/POE OUT Connector - RJ45
• Warranty - 1 Year

POE29U-1AT Specifications PDF