FVT10 Comnet Video Transmitter, mm, 1 fiber

The ComNet FVT10 single channel transmitter supports one independent AM video signal on one independent multimode optical fiber. The FVT10 video transmitter is compatible with the FVR10, FVR10M, FVR11, FVR11M, FVR21 and FVR22 receivers. Plugand- play design ensures ease of installation requiring no electrical or optical adjustments. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Bandwidth - 5 Hz - 10 MHz
• Differential Gain - <5%
• Differential Phase - <5°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 60 dB
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
• Wavelength - 850 nm, Multimode
• Number of Fiber - 1

Connetors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)

Led Indicator

• Video Present

Electrical & Mechaninsal

• Power - 8-15 VDC @ 80 mA
• Circuit Board - Meets IPC Standard
• Size (in./cm) (LxWxH) Surface Mount - 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
• Shipping Weight - <1 lb./0.45 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

FVT10 Specifications PDF

FVT10 Manual