TXF-125DM TAKEX 330' Selectable Range Detection, 3.6V Lithium Battery, Form C Relay Output

The TXF-125E and TXF-125DM are battery operated quad photoelectric beam sensors designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations.

Specifications

• Model - TXF-125DM
• Detection system - Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)
• Infrared beam - Double modulation pulsed beam by LED (near infrared beam light-emitting diode)
• Protection distance - Outdoor 100'(330 m) or less
• Protection distance setting - 25m(82'), 50m(165'), 75m(247'), 100m(330') (4 distances selectable)
• Distance margin (maximum arrival distance) - 10 times 3300'(1000m)
• Response time - 50ms, 100ms, 250ms, 500ms (4-level changeover)
• Modulated beam frequency selection - 4channels
• Power supply voltage - 3.6VDC (recommended battery.SAFT thium thionyI chloride battery LS33600)
• Current consumption
  • 1,650μA
  • Transmitter : Approx. 1,130μA (during protection)
  • Receiver : Approx. 520μA, (during protection) (normal temperature, 3.6V DC)
• Battery life
  • Transmitter Approx.3 years (at normal temperature, with 4 recommended batteries, excluding a wireless transmitter)
  • Receiver - Approx.3 years (detects 100 times a day, at normal temperature, with 2recommended batteries, excluding a wireless transmitter)
• ALARM OUTPUT (Receiver only) - Contact method : Solid state swich form C, Contact capacity : 3.6V DC 0.01A (resistive load)
• Environment output (receiver only) - Contact method : Solid state swich form C, Contact capacity: 3.6V DC 0.01A (resistive load)
• Low battery output (transmitter and receiver) - Contact method : Solid state swich (N.O.), Contact capacity: 3.6V DC 0.01A (resistive load)
• Tamper output (cover, back) (transmitter and receiver) - Contact method : Solid state swich (N.C.) Contact capacity: 3.6V DC 0.01A (resistive load)
• Power output(transmitter and receiver) - 3.0 to 3.6V DC 65mA max. (2 x new batteries)
• Beam adjustment - Horizontal: 士90°, Vertical: 士 20°
• Alarm LED - Red LED (Receiver) ON : when alarm is generated (Active only when the cover is open)
• Attenuation LED - Red LED (Receiver) ON : when beam is attenuated (Active only when the cover is open)
• Ambient temperature - -25C to+60C (-13°F to+140°F) (No freezing or condensation) (The battery function may decrease at 0°c or less, or +40°c or more)
• Functions - Sound check, Monitor jack, Upper/lower beam switch Low battery indication, Wireless alignment checker connection Battery saving, Repeat output
• IP rating - IP 65
• Mounting position - Outdoor, Indoor
• Weight - Transmitter : 1,350g (47.3oz) (excluding batteries) Receiver : 1,350g (47.3oz) (excluding batteries)
• Appearance - Cover : Resin (Wine red) Base : Resin (Black)

TXF-125DM Specifications PDF