ESML6-FL2-S2-DCA KBC Industrial Ethernet switch Layer 2 managed 6 electrical 10/100Mbps LAN ports redundant 2 optical 100Mbps LAN ports

The KBC ESUL6-FL2 Ethernet series is an unmanaged industrial switch designed for use in a wide range of operating temperatures in non–environmentally conditioned, industrial applications. The switch provides connectivity for up to six 10/100 Mbps twisted pair copper ports and two multimode or singlemode 100 Mbps fiber ports. All ports are automatically configured and the plug-and-play design provides ease and speed of installation. Redundancy is offered through the DT-Ring technology that recovers cable or port failures automatically in less than 100ms. The series is available in either DIN rail or wall-mount configurations.

Specifications

Standards

• IEEE Standard - IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX & 100BASE-FXIEEE 802.3x Full Duplex IEEE 802.1p Class of Service IEEE 802.1q VLAN Tagging IEEE 802.1d Spanning Tree Protocol

Switch Performance

• Switching Method - Store & forward
• Transfer Rate - 148,810 pps
• Backplane Switch Capacity - 2.8 Gbps
• Mac Address Table - 8k
• No. of VLAN - 4094
• No. of Priority Queues - 8

Power

• Power Input - 18 – 36 Vdc
• Power Supply(1) - Dual redundant Input: 100~240 Vac Output: +24 Vdc
• Power Consumption - <6W

Mechanical

• Casing - IP40 protection
• Dimensions (W x H x D) - 56mm x 139mm x 120mm 2.20" x 5.47" x 4.73"
• Weight - 1000g
• Installation - Wall-mount or DIN rail

Environmental

• Operating Temperature - -40°~+85°C / -40°~+185°F
• Storage Temperature - -40°~+85°C / -40°~+185°F
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - >300,000 Hours

Connectors

• 10/100 Electrical - 6 x RJ45
• 100BASE-FX - 2 x Duplex SC
• Contact Closure Alarm - 2-way Screw block terminal
• Console - 1 x RJ45
• Power(2) - 3-way Screw block terminal (dual redundant)

ESML6-FL2-S2-DCA Specifications PDF