500702 Muxlab Longreach 3G-SDI Extender Kit

Specifications

• Environment - SDI single link: SD, HD & 3G.
• Devices - Monitors or any equipment supporting SDI single link.
• Standard supported - SMPTE 259M (270Mb/s), SMPTE 292M & SMPTE 424M.
• Bit rates - 270Mb/s, 1.485Gb/s & 2.97 Gb/s (automatic selection).
• Format tested - SD: 525i, 59.94 Hz & 625i, 50 Hz
  HD: 1035i, 60 Hz & 1080i, 50 Hz & 1080p, 30 Hz & 1080i, 60 Hz & 1080p, 25 Hz & 1080i, 50 Hz & 1080p, 24 Hz & 720p, 60 Hz
  3G: 1080p, 4:2:2, 10b, 60Hz & 1080p, 4:2:2, 10b, 50Hz & 720p, 4:4:4:4, 10b, 60Hz & 720p, 4:4:4:4, 10b, 50Hz & 1080p, 4:4:4:4, 10b, 30Hz & 720p, 4:4:4:4, 10b, 30Hz & 1080p, 4:4:4:4, 10b, 25Hz & 720p, 4:4:4:4, 10b, 25Hz & 1080p, 4:4:4:4, 10b, 24Hz & 720p, 4:4:4:4, 10b, 24Hz & 1080i, 4:4:4:4, 10b, 30Hz & 1080i, 4:4:4:4, 10b, 25Hz & 1080p, 4:4:4, 12b, 30Hz & 1080p, 4:4:4, 12b, 25Hz & 1080p, 4:4:4, 12b, 24Hz & 1080i, 4:4:4, 12b, 30Hz & 1080i, 4:4:4, 12b, 25Hz & 1080p, 4:2:2, 12b, 30Hz & 1080p, 4:2:2, 12b, 25Hz & 1080i, 4:2:2, 12b, 30Hz & 1080i, 4:2:2, 12b, 25Hz
  Only LEVEL A MAPPING is supported.
• Indicators - Power SDI Sync RJ45 Link
• Connectors On each unit - One BNC 75 ohm female. One RJ45S for Cat5e/6 unshielded twisted pair. One power connector, 2mm.
• Maximum Distance - UTP Cat 5e: 330 ft (100 m) UTP Cat 6: 400 ft (122 m) for 500700 UTP Cat 5e: 500 ft (150 m) UTP Cat 6: 500 ft (150 m) for 500702 Maximum distance applies for all format and speed between boxes. On the SDI side, the use of an equalizer at input and a clock regenerator at output allow to reach the maximum distance on coax.
• RJ45 Pin Configuration Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring - RJ45 Link
  Pin 1 (R) Pin 2 (T)
  Pin 3 (R) Pin 6 (T)
  Pin 4 (R) Pin 5 (T)
  Pin 7 (R) Pin 8 (T)
• Cables (Not included) - One straight Cat 5e/6 twisted pair cables required. Two 75 ohm coaxial cables with 75 ohm BNC required
• Power Supply (Included) - Two 100-240V/5-12VDC 15W power supplies with interchangeable blades for NA, Europe and UK.
• Power Consumption - Transmitter: 4 Watts Receiver: 8 Watts
• Temperature - Operating: 0° to 40°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing
• Enclosure - 6061 Aluminum alloy
• Dimensions - 4.50" x 3.00" x 1.25" (11.4 x 7.6 x 3.2 cm)
• Weight - 2.5 lb. (1.1 kg)
• Compliance - Regulatory: FCC, CE, RoHS Flammability: 94V0
• Warranty - 2 years
• Order Information - 500702 LongReach HD-SDI Extender Kit

500702.pdf Specifications PDF