500712 Muxlab 6G-SDI Fiber Extender Kit

Specifications

• Environment - SDI single coaxial link: 6G (UHD), 3G & HD.
• Devices - Monitors or any equipment supporting 6G (UHD), 3G & HD single coaxial link.
• Standard supported - SMPTE 2081, SMPTE 424M, SMPTE 292 & SMPTE 259
• Bit rates - 5.94Gb/s, 2.97Gb/s & 1.485Gb/s (automatic selection).
• Indicators - Power. Signal present.
• Connectors On each unit - One BNC 75ohm female. One duplex LC single-mode fiber connector. One locking power connector, 2mm.
• Typical Distance On coax: On fiber: - ng low loss coax Belden 1694A cable (RG6): 260ft (80m) at 5.94Gb/s, 700ft (210m) at 2.97Gb/s, 1000ft (300m) at 1.485Gb/s Using single-mode fiber 9/125µm for 1310nm: 60,000ft (20km
• Optic link required - Simplex or Duplex SMF fiber 9/125µm with LC connectors (only one fiber is used).
• Eye safety for laser - Class 1, compliant with IEC60825-1
• Voltage required - 5 - 12 VDC, 1.25W each unit
• Power Supply Included - Two 100-240V/12VDC 6W power supplies with interchangeable blades for NA, Europe and UK.
• Power Consumption - Transmitter: 1.25Watts Receiver: 1.25Watts
• Temperature - Operating: 0° to 50°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing
• Module Enclosure - Black, metal Size: 3" x 3" x 1" (7.6cm x 7.6cm x 2.5cm) excluding connectors.
• Dimensions - Shipping box: 10"x9"x4" (25cm x23cm x10cm)
• Weight - 2.2lbs (1kg)
• Compliance - Regulatory: FCC, CE, RoHS Flammability: 94V0
• Warranty - 2 years
• Order Information - 500712 6G-SDI Fiber Extender Kit

500712 Specifications PDF