500700 Muxlab HD-SDI Extender Kit

The 3G-SDI & LongReach 3G-SDI Extedner Kits allow HD-SDI to be transmitted up to 330 / 500 ft via Cat5e cable at all resolutions in a point -to-point .The HD-SDI Extender Kit supports transmission of up to 2.97/3.0Gbps uncompressed, unencrypted digital video(optionally including up to 32channelsof embeddedAudio and/or embedded Time Code)within television facilities and between professional video equipment

Specifications

• Environment - SDI single link : SD,HD&3G
• Devices - Monitors or any equipment supporting SDI single link
• Standard supported - SMPTE 259M(270Mb/s), SMPTE 292M & SMPTE 424M
• Bitrates - 270Mb/s, 1.485Gb/s & 2.97Gb/s (automaticselection)
• Format tested
  • SD : 525i, 59.94 Hz & 625i, 50Hz
  • HD : 1035i, 60 Hz & 1080i, 50 Hz & 1080p, 30Hz & 1080i, 60 Hz & 1080p, 25Hz & 1080i, 50Hz & 1080p, 24 Hz & 720p, 60Hz
  • 3G : 1080p, 4:2:2, 10b, 60Hz & 1080p, 4:2:2,10b, 50Hz & 720p, 4:4:4:4, 10b,60Hz & 720p, 4:4:4:4, 10b,50Hz & 1080p, 4:4:4:4, 10b, 30Hz & 720p, 4:4:4:4, 10b, 30Hz & 1080p, 4:4:4:4, 10b, 25Hz & 720p, 4:4:4:4, 10b,25Hz & 1080p, 4:4:4:4, 10b, 24Hz & 720p, 4:4:4:4, 10b,24Hz & 1080i, 4:4:4:4, 10b,30Hz & 1080i, 4:4:4:4, 10b, 25Hz & 1080p, 4:4:4, 12b, 30Hz & 1080p, 4:4:4, 12b, 25Hz & 1080p, 4:4:4, 12b, 24Hz & 1080i, 4:4:4, 12b, 30Hz & 1080i, 4:4:4, 12b, 25Hz & 1080p, 4:2:2, 12b, 30Hz & 1080p, 4:2:2, 12b, 25Hz & 1080i, 4:2:2, 12b, 30Hz & 1080i, 4:2:2, 12b, 25Hz Only LEVEL A MAPPING is supported
• Indicators - Power SDI Sync RJ45 Link
• Connectors
  • One BNC 75 ohm female. One RJ45S for Cat5e/6 unshielded twisted pair. One power connector, 2mm
• Maximum Distance
  • UTP Cat5 e : 330ft (100m) UTP Cat6 : 400ft(122m) for 500700
  Maximumdistance applies for all format and speed between boxes. On the SDI side, the use of an equalizer at input and a clock regenerator at output allow to reach the maximum distance on coax
• RJ45 Pin ConfigurationReverse Polarity Sensitive. Use EIA/TIA568A or 586B straight-through wiring
  • RJ45 Link
  • Pin1(R)
  • Pin2(T)
  • Pin3(R)
  • Pin6(T)
  • Pin4(R)
  • Pin5(T)
  • Pin7(R)
  • Pin8(T)
• Cables - One straight Cat5e/6 twisted pair cables required. Two 75 ohm coaxial cables with 75 ohm BNC required
• Power Supply - Two 100-240V/5-12VDC 15W power supplies with interchangeable blades for NA, Europe and UK
• Power Consumption
  • Transmitter : 4 Watts
  • Receiver : 8 Watts
• Temperature
  • Operating : 0° to 40°C
  • Storage : -20° to 85°C
  • Humidity : Upto 95% non-condensing
• Enclosure - 6061 Aluminumalloy
• Dimensions - 4.50"x3.00"x1.25"(11.4 x 7.6 x 3.2cm)
• Weight - 2.5 lb. (1.1kg)
• Compliance
  • Regulatory : FCC, CE, RoHS
  • Flammability : 94V0
• Warranty - 2 years
• Order Information - 500700 HD-SDI Extender Kit

500700 Specifications PDF

500700 Manual