500767-RX-UTP Muxlab 3G-SDI/ST2110 over IP Uncompressed Gateway Converter RX

The 3G-SDI/ST2110 over IP Uncompressed Gateway Converter allows HD-SDI and 3G-SDI equipment to be extended up to 100ft (30m) via UTP Cat 6a/7 cable or up to 1300ft (400m) via duplex multimode OM4 fiber with LC connectors, at up to 1080p resolution @ 60Hz uncompressed, in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also possible by connecting several units to a 10G Ethernet network.

Specifications

• Environment - HD-SDI and 3G-SDI
• Devices - HD/3G-SDI cameras, mixers, media players, monitors, TV, PC, laptops, servers supporting HDMI
• Signals - SDI protocol (supports ST-2110)
• Connectors/Switches
  • One (1) BNC connector for SDI
  • One (1) SFP for Ethernet and UTP connection to a 10G Ethernet Switch for transmission & control
  • One (1) RJ45S for 1G Ethernet Switch port for additional network devices
  • One (1) RS232 3-Pin Phoenix connector
  • One (1) 2.1mm locking power connector
  • Four (4) DIP Switches for device ID addressing
• Maximum Distance
  • Cat 6a/7 : 100ft (30m) up to 1080P @ 60Hz
  • OM4 : 1300ft (400m) up to 1080p @ 60Hz
  • OM3 : 985ft (300m) up to 1080p 2 60Hz
  • Coax : 689ft (210m) @ 2.97Gbps and 985ft (300m) @ 1.485Gbps (using Belden 1694A cable)
• Latency - Zero latency
• Compression - None (uncompressed)
• Network Bandwidth - Up to 3Gbps
• Network Requirement - 10G Ethernet LAN
• RJ45 Pin Configuration (Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring)
  • RJ45 Link
  • Pin 1 (R)
  • Pin 2 (T)
  • Pin 3 (R)
  • Pin 4 (R)
  • Pin 5 (T)
  • Pin 6 (T)
  • Pin 7 (R)
  • Pin 8 (T)
• Cables
  • One (1) Duplex multi-mode fiber cable (for MMF version)
  • One (1) Cat 6a/7 or better twisted pair cables (for UTP version)
• Power Source - One (1) 12VDC Power Supply included per Transmitter and per Receiver
• Power Consumption - 15 watts (max)
• Temperature
  • Operating : 0° to 40°C
  • Storage : -20° to 85°C
  • Humidity : Up to 95% non-condensing
• Dimensions - 4.4" x 4.6" x 1.0" (111mm x 120mm x 25mm)
• Weight - 1.5 lbs (0.7kg)
• Compliance
  • Regulatory : FCC, CE, RoHS
  • Flammability : 94V0
• Warranty - 3 years
• Order Information - 500767-RX-UTP 3G-SDI/ST2110 over IP Uncompressed Receiver, UTP (UPC : 627699807675)
• Accessories
  • 500920 16-Port Rackmount Transceiver Chassis
  • 500917 Wall Mount Transceiver Bracket Kit

500767-RX-UTP Specifications PDF

500767-RX-UTP Manual