GWS-120V GreenWorx Zone Wall Switch 120V

The GreenWorx Wall Switch is a line voltage rocker switch with a FCM1R built into it and is capable of controlling a single 20A circuit. The rocker switch allows direct control of the circuit like a standard wall switch and allows the circuit to be managed by the GSC and be turned on and off by schedules or other input devices such as photocells or occupancy sensors.

Specifications

Electrical

• Power Requirements - 120/277Volt AC, 50/60Hz: 3 Phase
• Connections/Power Wire - Terminal block, 16 AWG guage - stranded, Black - Line, Red - Load, White - Neutral
• Standby Power Consumption - < 1/2 Watt

Load Ratings

• Channels - 1
• Load per Channel - 20 amps @ 120 or 277 Volts AC, 50/60Hz
• Load Types - Flourescent, Inductive, LED
• Relay Life Cycle - 100,000 on/off operations at full electronic ballast load
• Connectors - 6 position Wago #253 series or equivalent
• Guage - 16-20 Solid or Stranded AWG

Operation

• Memory - Internal Flash, External EEPROM
• Status LED - SETUP mode = Blinks GREEN, TEST mode = Blinks ORANGE, Transmitting Data = Blinks RED, Receiving Data = Blinks GREEN/RED, Lost or no Heartbeat = Slowly blinks GREEN, Factory Default = Blinks RED rapidly

Environmental

• Operational Temperature - -40° to 194° F (-40° to 90° C)
• High Temperature models - -40° to 240° F (-40° to 115° C)
• Humidity - 10% to 90% RH (non-condensing)
• Heat Dissaipation - .82W
• Certifications - Safety tested for USA and Canada ETL tested to UL508

Mechanical

• Mounting - Single gang electrical box
• Length - 4.25 in (108 mm)
• Width - 1.68 in (42.7 mm)
• Depth - 1.37 in (34.8 mm)
• Weight - 4.4 oz (125 g)