HVC PDK Red High Voltage Converter - Converts Line Voltage to 12VDC/2 Amps

Maximize the level of security

Additional products are available to extend your wireless signal, provide power to your controllers, and test your signal strength with security in mind.

Power up the cloud node or single io in areas where high voltage power is available. The hv converter accepts 90 - 264VAC and converts it to 12VDC at 2a. It’s perfect for interfacing with the nearest high voltage source and eliminating the need to run a power wire to controllers.

Models

PN: HVC

Specifications

• Input - Voltage Range: 90~264Vac auto range, Frequency: 47~63Hz, Efficiency: The average efficiency at 25%, 50%, and 100% load ≥ 82%, Input Current: 90~132Vac / 12V / 2A load ≥ 1A, 180~264Vac / 12V / 2A load ≥ 0.5A
• Output - 12V 0A to 2A
• Protection - Auto recovery on Over-current, Over-temp, Short, Over-voltage
• Environmental - Temperature: 0º ~ +50º C 100% load, +60º C 80% load, +70º C 60% load, Storage temp: -20 to 70Ëš, Operating humidity: 10% - 90%, Storage humidity: 10% - 95%
• CE - Input: 3.0KVac Output: 3.0KVacEC
• Isolation - CE: In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC
• Reliability - >100,000 hours@ 100% load and normal inputs (25ËšC)
• Enclosure - Dimensions (W x H x D) 5” x 5” x 2” Metal lockable security can (indoor use only)
• Weight - HVC - 1.37 lbs (22 oz)
• Manufacturer’s Limited Warranty - One to three-year warranty against defects in materials and workmanship.
• Electrical Safety - UL/cUL, TUV, CB by Demko, CCC, CE, KC, BSMI refer to EN 60950-1

HVC Specifications PDF