P1220-PWH0 Pelco 4.3-86mm 20x Optical Zoom 30FPS @ 1920 x 1080 Indoor Day/Night PTZ IP Security Camera 24VAC/POE - Pendant

Specifications

CAMERA

• Sensor Type - 1/3-inch CMOS Sensor
• Optical Zoom - 20X
• Digital Zoom - 12X
• Maximum Resolution - 1920 x 1080
• Lens - f/1.6 ~ f/4.2 focal length 4.3 mm (wide) ~ 86.0 mm (tele)
• Horizontal Angle of View - 55.4° (wide) ~ 2.9° (tele)
• Aspect Ratio - 16:09
• Shutter Range - 1 ~ 1/8,000 sec
• Dynamic Range - 60 dB
• White Balance Range - 2,500° to 8,000°K
• 3D Noise Reduction - Yes (ON/OFF selectable)
• Signal to Noise Ratio - 50 dB
• Light Sensitivity
  • Color (33 ms) - 0.3 lux
  • Color (200 ms) - 0.08 lux
  • Mono (33 ms) - 0.1 lux
  • Mono (200 ms) - 0.015 lux

AUDIO

• Streaming - Embedded with stream 1 and stream 2
• Input - Line in/terminal block
• Encoding - G.711 A-law/G.711 U-law

VIDEO

• Video Encoding - H.264 High, Main, or Base profiles and MJPEG
• Video Streams - Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
• Frame Rate - Up to 30, 25, 20, 16.67, 15, 12.5, 10, 7.5, 5, 3, 2, 1 (depending on the combination of coding, resolution, and stream configuration)

NETWORK

• Supported Protocols - TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)
• Users
  • Unicast - 1 admin and up to 4 viewers simultaneously depending on resolution settings
  • Multicast - Unlimited users H.264
• Security Access - Password protected
• Software Interface - Web browser view and setup
• Pelco System Integration - Endura 2.0 (or later) Digital Sentry 7.3.208 (or later)
• Open API - Pelco API, ONVIF Profile S
• Mobile Application - Integrated to Pelco Mobile App
• Video Motion Detection - Simple motion detection and camera Sabotage
• Local Storage - 32GB SD Card

GENERAL

• Construction - PC-ABS and sheet metal
• Light Attenuation
  • Smoked - 50% light attenuation
  • Clear - f/0.0 light loss
• Cable Entry (back box)
  • In-Ceiling - 0.75-inch conduit fitting
  • Pendant - 1.5-inch NPT pendant mount
• Weight (approximate)
  • Unit - 2.79 kg (6.17 lb)
  • Shipping - 4.41 kg (9.73 lb)

ENVIRONMENTAL

• Installation Environment - Indoor/environmental
• In-Ceiling - Indoor/environmental
• Operating Temperature - –10° to 50°C (14° to 122°F)
• Indoor - –40° to 50°C (–40° to 122°F)
• Environmental - 20% to 80% (noncondensing)
• Operating Humidity - All models
• Storage - –40° to 60°C (–40° to 140°F)
• Temperature - 20% to 80% (noncondensing)
• Humidity - 20% to 80% (noncondensing)
• Effective Projected Area (EPA)
  • Without Mount - 869 square centimeters (135 square inches)
  • With IWM Series Mount - 1,592 square centimeters (247 square inches)

MECHANICAL

• Pan Movement - 360° continuous pan rotation
• Tilt Movement - +1° to –90°
• Preset Speed
  • Pan - 430°/sec
  • Tilt - 200°/sec
• Preset Accuracy
  • Pan - ±0.1°
  • Tilt - ±0.05°
• Variable Manual Speed
  • Pan - 0.1°/sec to 100°/sec
  • Tilt - 0.1°/sec to 50°/sec

ELECTRICAL

• Ports - RJ-45 connector for 100Base-TX Auto MDI/MDI-X;Autonegotiate/manual setting
• Cabling Type - Cat5 or better for 100Base-TX
• Input Voltage - 18 to 32 VAC; 24 VAC nominal
• Input Power
  • Indoor - 24 VAC; 26 VA; PoE+ IEEE 802.3at Class 4, 48 V, 600 mA
  • Environmental - 24 VAC; 50 VA
• Alarms
  • Inputs - 4
  • Output - 1; PhotoMOS relay (30 V, 1 A)
  • Triggers - Unsupervised mode that detects switch closures (N.O. and N.C.)

P1220-PWH0 Specifications PDF