EXHS000 Videotec Sunshield for EXHC Series Housings

The EXHC000G housing is made with strong anticorodal aluminium die-cast alloy of the AISi 7Mg EN - AB 42000 group.
The germanium viewing window is designed for thermal imaging camera installations. Its composition with the remarkable properties covers transmission from 7.5 to 14μm IR range with the best optical quality. All external components are stove enamelled.

Specifications

General

• Non-corrosive die-cast aluminium (anticorodal)
• Epoxy powder painted with orange peel effect, RAL7032

Mechanical

• 2 inputs 3/4" NPT for cable glands
• External dimensions: 210x427.5mm (8.3x16.8in)
• Internal dimensions: 180x380mm (7.1x15in)
• Internal usable area: 100x100x280mm (3.9x3.9x11in)
• Unit weight: 15kg (33.5lb)

Housing's window

• Germanium window
• Usable diameter: 114mm (4.5in)
• Thick:12mm (0.47in)
• External treatment: antiscratch (Hard Carbon Coating - DLC), antireflection
• Internal treatment: antireflection
• Spectral range: from 7.5μm up to 14μm
• Medium transmittance (from 7.5μm up to 11.5μm): 86.6%
• Medium transmittance (from 11.5μm up to 14μm): 67.8%

Electrical

• Power supply IN 24Vac, 50/60Hz
• Heater Ton 10^°C±4^°C (50^°F±7^°F) Toff 25^°C±3^°C (77^°F±5^°F)
• IN 24Vac, power consumption 20W max
• Devices to install inside the housing:
• Camera equipped with lens with max total power of 20W
• Voltage 24Vac max
• Useful volume for camera / lens: 2800cm ³
• Minimum distance between the walls of the housing and the camera/lens: 12mm

Environment

• For installation indoors and outdoors
• Operating temperature with heating: from -20^°C (-4^°F) up to+50^°C (122^°F)
• Always refer to the temperature in the marking.

Certifications

• ATEX (EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009):
• Ex II 2G Ex d IIC T6 Gb
• Ex II 2D Ex t IIIC T85 ^°C Db IP66
• 0044: notify number from competent body
• EAC EX:
• Ex II 2G Ex d IIC T6 Gb,-20^°C/+50^°C
• EX II 2D Ex t IIIC T85^°C Db -20^°C/+50^°C, IP66

EXHS000 Specifications PDF