IME122-1ES Pelco 9-22mm Motorized 60FPS @ 1280 x 960 Outdoor Day/Night WDR Dome IP Security Camera 12VDC/24VAC/POE

Specifications

Camera

• Imaging Device - 1/2.8-inch
• Imager Type - CMOS
• Imager Readout - Progressive scan
• Highest Resolution
  • 3 MPx - 2048 x 1536
  • 2 MPx - 1920 x 1080
  • 1.3 MPx - 1280 x 960
• Signal-to-Noise Ratio - >60 dB
• Electronic Shutter Range - 1/20000 sec (or faster) to 2 sec
• Wide Dynamic Range - 130 dB
• White Balance Range - 2,000° to 10,000°K
• Sensitivity 3 ~ 9 mm - f/1.3; 2,850°K; SNR >20 dB
• Color (33 ms) - 0.050 lux
• Color (500 ms) - 0.005 lux
• Mono (33 ms) - 0.010 lux
• Mono (500 ms) - 0.001 lux
• Mono (IR on) - 0.000 lux
• Sensitivity 9 ~ 22mm - f/1.6; 2,850°K; SNR >20 dB
• Color (33 ms) - 0.200 lux
• Color (500 ms) - 0.010 lux
• Mono (33 ms) - 0.100 lux
• Mono (500 ms) - 0.0025 lux
• Mono (IR on) - 0.000 lux
• Day/Night Capabilities - Yes
• Mechanical IR Cut Filter - Yes, (ON/OFF/AUTO selectable), with different set points on lux
• Adaptive IR Illumination - 850nm wavelength, maximum distance of 30 meters (100 feet) IR illumination at 0 lux
• SD Card Support - Up to 128 GB
• SDHC/SDXC Cards Supported - Yes

Lens

• Lens Type - Built-in; varifocal
• Focal Length - f/1.3, 3 ~ 9 mm, f/1.6, 9 ~ 22 mm
• Focus - Autofocus, motorized
• Zoom - Remote
• Auto Iris Type - DC drive P-iris lens

Audio

• Streaming - Bidirectional: full or half duplex
• Input/Output - Line level/external microphone input; Single-ended, stereo, 1 Vp-p max. signal level
• Compression - G.711 PCM 8 bit, 8 kHz mono at 64 kbit/s

Machanical

• Dome Attenuation
  • Clear - f/0.0 light loss
  • Pan/Tilt Adjustment - Manual
  • Pan - 355°
  • Tilt - 75°
  • Rotation - 340°

Physical

• Weight
  • Indoor, Surface Mount - 1020 gm (2.25 lb)
  • Environmental, Surface Mount - 1020 gm (2.25 lb)
  • Product Box Dimensions (approximate) - 6.75 x 6.75 x 6.75 in.

Environmental

• Operating Temperature
  • Indoor/Vandal-Resistant - –10° to 55°C (14° to 131°F)†
  • Environmental - –40° to 55°C (–40° to 131°F)†
• Start-up Temperature
  • Indoor - –10°C (14°F)
  • Environmental - With heater, –40°C (–40°F)
  • Storage Temperature
    • Indoor and Environmental - –40° to 60°C (–40° to 140°F)
• Operating Humidity
  • Indoor/Vandal-Resistant - 10 to 90%, RH noncondensing
  • Environmental - 5 to 95%, RH noncondensing
  • Storage Humidity - 20 to 80%, RH noncondensing
  • Impact Resistance - IK10 (20J) all surfaces per IEC 62262
  
  

  IME122-1ES Specifications PDF