500770-TX Muxlab KVM HDMI over IP PoE Extender Kit

Specifications

• Environment - HDMI 1.4
• Devices - Computers and servers with HDMI monitor ports.
• Transmission - Transparent to the user
• Bandwidth - 300MHz
• Signals - HDMI 1.4 protocol, HDCP 1.4
• Connectors Note: Cables not included. - One (1) HDMI receptacle. One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair. Two (2) 3.5mm jacks for audio insert (on TX)/audio extract (on RX). One (1) 2.1mm locking barrel jack for power One (1) or Four (4) USB Connector(s) for Host (on TX)/Client (on RX) Four (4) DIP Switches for device ID addressing
• Maximum Distance Based on a maximum length of 6.6ft (2m) of HDMI cable per end. - Cat5e/6: 330ft (100m) up to 1920x1200 and 1080p @ 60Hz Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
• Latency - Typical one (1) Frame (16ms), maximum 2 frames (33ms)
• Compression - JPEG 2000
• Bandwidth - Up to 315Mbps
• Network Requirement - 1000BaseT with PoE
• RJ45 Pin Configuration Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight through wiring. - RJ45 Link Pin 1 (R) Pin 2 (T) Pin 3 (R) Pin 6 (T) Pin 4 (R) Pin 5 (T) Pin 7 (R) Pin 8 (T)
• Cable - One (1) Cat 5e/6 or better twisted pair cables required
• Power Source - This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
• PoE Standard - IEEE 802.3af
• Power Consumption - Transmitter: 2.85Watt Receiver: 2.55Watt
• Temperature - Operating: 0° to 40°C Storage: -20° to 85°C Humidity: Up to 95% non-condensing
• Dimensions - 4.40" x 5.08" x 1.00" (112mm x 129mm x 25mm)
• Weight - 1.5lbs (0.68kg)
• Compliance - 3 years
• Order Information - 500770-TX KVM HDMI over IP PoE Extender TX (UPC: 67699907702)

500770-TX.pdf Specifications PDF