ORB35 Bogen Voice Reinforcement System

The Orator Receiver/Base (ORB35) unit contains a two-channel wireless IR receiver and a 35W mixer/ amplifier with four AUX inputs plus a Priority Paging input compatible with line-level as well as speakerlevel signals. The priority page input will mute all AUX inputs. Front-mounted Bass and Treble

Specifications

• Communication Method - Infrared Frequency Modulated
• Output Power Rating - 35W
• Output Speaker Impedance - Balanced or unbalanced 8-ohms, 25V, 70V
• Receiving Channels - Two independent channels
• Carrier Frequency
  • 4 operational frequencies between 1.8 – 2.7 MHz
  • Selectable as two bands - 1.8/2.4 MHz or 2.1/2.7 MHz
• Range (line-of-sight) - Up to 40 ft.
• Audio Frequency Response - 60 Hz to 20 kHz AUX inputs, 100 Hz to 10 kHz Channel A & B
• S/N Ratio - > 70 dB AUX/Page inputs; > 60 dB Channel A & B
• Distortion - < 1% AUX inputs, < 3% Channel A & B
• Input Sensitivity - ORB35- AUX - 85mV; Priority Page - 150mV or 25/70V
• Input Impedance - ORB35- AUX - >10k ohms; Priority Page - 1k ohms (min.)
• Controls
  • Front-Mounted - AUX 1 – 4 Level, Master Volume, Bass and Treble
  • Rear-Mounted - Channel A & B Level, Page Override Level, 6 bands of EQ, Confirmation Tone Level
• Audio Inputs
  • Front-Mounted - AUX 4 (Stereo combining RCA jacks)
  • Rear-Mounted - AUX 1 – AUX 4 (Stereo combining RCA jacks) Page Override (pluggable terminal strip)
• Audio Outputs
  • Front-Mounted - Monitor Out (RCA jack and 1/8" Mini)
  • Rear-Mounted - Booster Out and Subwoofer Out (RCA jacks); Speaker connections (pluggable terminal strip)
• Switches
  • Front-Mounted - Power
  • Rear-Mounted - EQ In/Out, 8-position DIP switch (configuration)
• Other Connectors
  • Rear-Mounted - Sensor input (F-type Connector)
  • Rear-Mounted - C-form relay contact set (pluggable terminal strip)
• EQ
  • Bass and Treble controls (± 12 dB at 100 Hz and 10 kHz, respectively)
  • 6-Band Graphic EQ (± 12 dB at 250, 500, 1k, 2k, 4k, and 8k Hz)
• Indicators - Power; 2 Channel Active (one for each channel), 2 Charging (one for each dock)
• Chargers - Two front-mounted with lockable rotating cover
• Locks - Rotating cover; lock/unlock in both open or closed positions
• Power Requirements - 120V AC, 1A
• Dimensions - 17.25" W x 3.5" H x 12.5" D
• Product Weight - 17 lb.
• Safety Certifications - Listed to UL Standard 60065 for US and Canada

ORB35 Specifications PDF

ORB35 Manual