0090144 Potter Kit IFS Rigid Paddle

Description

The Model IFS-WPS is a low turn radius (1.88") flow switch used in liquid flow lines carrying water or any fluid not harmful to brass, stainless steel, or EPDM, and not classified as a hazardous fluid. This switch can serve as a way to start and stop electrically operated equipment when a flow or no flow condition occurs in a variety of applications.

This device is designed for use only as an operating control. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of the installer to add devices (safety, limit controls) that protect against, or systems (alarm, supervisory systems) that warn of control failure.

Technical Specifications

• Listings/Approvals:
  • UL Guide (NKPZ) for industrial control equipment per UL Standard 508 Industrial Control Equipment
  • CSA Class (321106) for industrial control equipment per CSA Standard C22.2 No. 14-M Industrial Control Equipment
  • CE Marked
• Maximum Service Pressure: - 250 PSI
• Enclosure: - Die-cast housing and high impact resistant polycarbonate cover. Not for use in hazardous locations
• Contacts:
  • One SPDT (Form C) switch
  • 10 Amps at 125/250VAC
  • .5 Amps at 125VDC
  • .25 Amps at 250VDC
• Motor Ratings : - 115VAC 230VAC
• Horsepower - 1/3 1/3
• AC F.L.A. - 7.2 3.6
• AC L.R.A. : - 43.2 21.6
• Pilot Duty Rating : - 332VA 120/240VAC
• Environmental Specifications:
  • Suitable for indoor or outdoor use with factory installed gasket and die-cast housing
  • NEMA 4 Rated Enclosure - use with appropriate conduit fitting
• Ambient Temperature Range: - 32°F to 150°F (0°C to 66°C)
• Media Temperature Range: - -20°F to 250°F (-29°C to 121°C)
• IFS-WPS Pipe Connection: - 1 in. NPT Brass
• IFSS-WPS Pipe Connection: - 1 in. NPT 316 Stainless Steel
• Conduit Entrance: - One opening for 1/2" conduit
• Usage: - For pipe sizes 1" - 8"

0090144 Specifications PDF