9000122 Potter IPSB40-1 Press SW w/Brass Bushing

Description

The Model IPS and IPSB are pressure switches designed to indicate an increase or decrease in normal system pressure. On the two switch models the two switches operate independently of each other and each switch may be adjusted to actuate at any point within their adjustable range.

They are designed for applications sensing air, water or any fluid or gas not harmful to nylon or silicone for models IPS and brass or silicone for models IPSB.

Technical Specifications

• UL Listed and CSA Approved
• Dimensions: - 4 3/4"W x 2 1/4"D x 4 3/8"H
• Enclosure: - NEMA Type 4 for indoor or outdoor use.
• Cover - Die-cast with textured gray powdercoat finish
• Base - Plated Steel with one opening for 1/2" conduit
• Pressure Connection: - 1/2" NPT Male
• Factory Adjustment:
  • IPS10 and IPSB10: - Operates on pressure increase at 6 PSI ±1PSI
  • IPS40 and IPSB40: - Operates on pressure increase at 40 PSI ±3PSI
• Differential Approx. (Not Adj.): - IPS10 and IPSB10 - 2 lbs., IPS40 and IPSB40 - 2 lbs. at 20 PSI; 5 lbs. at 175 PSI
• Adjustable Range: - IPS10 and IPSB10: 5-15 PSI, IPS40 and IPSB40: 10 - 175 PSI
• Maximum Pressure: - 250 PSI
• Switch Contacts:
  • One or two Snap Action SPDT (Form C Contacts)
  • 15.0 Amps at 125/250VAC,
  • 0.5 Amps at 125 VDC
  • 0.25 Amps at 250 VDC
• Motor Ratings: - 120VAC240VAC
• Horsepower: - 1/8 1/4
• AC F.L.A. - 3.8 2.9
• AC L.R.A. - 22.8 17.4
• Pilot Duty Rating: - 125 VA 120/240 VAC
• Ambient Temperature range: - -40°/131°F (-40°/55°C)
• Media Temperature range: - 32°/250°F (0°/121°C)

9000122 Specifications PDF