FVR110M1 Comnet Digitally Encoded Video Receiver/Data Transceiver MM 1 Fiber

The ComNet FVT/FVR110 series is a video transmitter/receiver and data transceiver that supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally encoded video and bi-directional data over one multimode or single mode optical fiber.

Specifications

Video

• Video Input - 1 Volt pk-pk (75 ohms)
• Overload - >1.5 V pk-pk
• Bandwidth - 5 Hz - 10 MHz
• Differential Gain - <2%
• Differential Phase - <0.7˚
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 67 dB @ Maximum Optical Loss Budget
• Max. RG-59 COAX Distance - 100 m (300 ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth

Data

• Data Interface - RS232, RS422, RS485 (2/4W), UTC (Up-the-Coax)
• Data Format - NRZ, NRZI Manchester, Bi-phase and Sensornet
• Data Rate - DC-250 Kbps (NRZ)

Contact

• Input - Dry Contact Closures
• Output - SPST Relay 0.5 Contact Rating

Wavelength - 1310/1550 nm, MM and SM

Optical Emitter - Laser Diode

LED Indicators

• Link
• Video
• Data
• Contact In
• Contact out
• Power

Connectors

• Optical - 1 ST connector
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)
• Data - Terminal Block

Power

• Operating Power - 8 to 15 VDC
Power Consumption - 5.25W

Electrical & Mechanical

• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (LxWxH), FVT/FVR110(M,S)1/M (Mini) - 3.3 x 2.5 x 1.46 in (8.4 x 6.4 x 3.7 cm)
• FVT/FVR110(M,S)1 (ComFit) - 6.1 x 5.3 x 1.1 in (15.5 x 13.5 x 2.8 cm)
• Shipping Weight - <2 lb / 0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Relative Humidity - 0% to 95% (non-condensing)¹

FVR110M1 Specifications PDF

FVR110M1 Manual