FVR11M Comnet Mini Video Receiver With Automatic Gain Control, mm, 1 fiber

The ComNet FVR11M video receiver detects an AM video signal on one multimode fiber optic cable. The receiver utilizes Automatic Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are only available in stand-alone configurations.

Specifications

Video

• Video Input - 1 volt pk-pk (AGC controlled)
• Bandwidth - 5 Hz - 10 MHz
• Differential Gain - <5%
• Differential Phase - <5°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR)
  • >55 dB @ 10 dB Attn.
  • >60 dB @ 7 dB Attn.
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
• Wavelength - 850 nm, Multimode
• Number of Fiber - 1

Connetors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)

Led Indicator

• Video Present

Electrical & Mechaninsal

• Power - 8-15 VDC @ 60 mA
• Circuit Board - Meets IPC Standard
• Size (in./cm) (LxWxH) Surface Mount - 4.0 x 3.7 x 1.0 in., (10.4 x 9.5 x 2.7 cm )
• Shipping Weight - <1 lb./0.45 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

FVR11M Specifications PDF

FVR11M Manual