CWFE2COAX Comnet Dual 10/100Mbps Media Converter, Commercial Grade Ethernet to COAX

ComNet CWFE1COAXM and CNFE2COAX support high-speed Ethernet transmission over standard 75 ohm coaxial cable circuits, at data rates of 100 Mbps, and transmission distances of up to 305 meters (1000 feet). The CWFE1COAX is a standard sized single channel unit, the CWFE1COAXM is a small sized unit and the CWFE2COAX contains two independent channels in a single standard-sized enclosure (ComFit). These media converters are the perfect solution for upgrading an existing coaxial cable plant for use with Ethernet, when compared to the significant costs and nuisance of installing new network cabling. Userconfigurable master/remote selection is included for unparalleled versatility. LED indicators are provided for rapidly ascertaining the operating status of the device. Packaged in a rugged, compact sized housing, theseunits are designed for shelf or stand-alone mounting, making them ideal for those installations were space is limited. The CWFE1COAXM and CWFE2COAX may also be DIN-rail mounted by the addition of the ComNet model DINBKT2 Adaptor Plate Kit. True plug-and-play design ensures ease of installation and operation, and no adjustments are ever required.

Specifications

Interface

• Ethernet Port
  • Ethernet connector - RJ45
  • Cable - Cat 5, Cat 5e, Cat 6
  • Data Rate - 100Mbps
  • Distance - 100m (328ft)
• Line Side Port (75Ω Coax)
  • Coaxial connector - BNC
  • Impedance - 75Ω coax
• Max Distance - 100Mbps throughput up to 305 m (1000 ft)

Electrical & Mechanical

• Power Standard Size - 9 – 24 VDC @ < 120 mA only
• Overload Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Small Size - 3.3 x 2.5 x 1.1 in., (8.4 x 6.4 x 2.8 cm)
• Shipping Weight - <2 lbs./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - 0° C to +60° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

CWFE2COAX Specifications PDF

CWFE2COAX Manual