CLRVE2COAX Comnet Comfit 2 Channel Analog and IP Video Over COAX Receiver

The ComNet CL(T,R)VE(1,2)COAX[POE][/M] is a communications link that combines composite analog baseband video and 10/100T(X) Ethernet on a single RG59 coaxial cable and transmits it up to 500 meters. The device is particularly suited to applications where the addition of IP Video to an existing analog video system is required. The CLTVE1COAXPOE/M model can provide power to the IP device via PoE.

Specifications

Video

• Input Signal - 1V pk-pk 75Ω
• Overloadl - >1.5V pk-pk
• Bandwidthl - 5 Hz – 6 MHz
• Diff. Gain Errorl - <2%
• Diff. Phase Error l -<0.7°
• Tiltl - <1%
• Signal-to-Noise Ratiol - 67 dB
• Max RG-59 Distancel - 500m (1,640ft)

Ethernet

• Interfacel - 10/100BASE-T(X) Ethernet, RJ-45
• Wire Typel - 4-pair CAT5 or better
• Data Ratel - 36MBps Downlink, 4MBps Uplink
• PoE - 30W IEEE802.3at

Power

• Operating Voltage Rangel - 12 to 36 VDC or 24 VAC
• Power Consumptionl - 4W

Electrical & Mechanical

• Overload Protection l -Automatic Resettable Solid-State Current Limiters
• Circuit Boardl - Meets IPC Standard
• Size (L x W x H) - 6.1 x 5.3 x 1.1 in. (15.5 x 13.5 x 2.8 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBFl - >100,000 hours
• Operating Templ - -40° C to +75° C
• Storage Templ - -40° C to +85° C
• Relative Humidityl - 5% to 95% (non-condensing)

CLRVE2COAX Specifications PDF

CLRVE2COAX Installation Manual