CLRFE1EOCP-M Comnet Miniature Copper Line Single Channel Ethernet over COAX PoE Powered

The ComNet CopperLine Ethernet-over-coax minis are an ultra-small form factor addition to the ComNet Copperline product family. These miniature remote units provide 10/100 Mbps Ethernet data with or without Pass-through PoE power over extended distance coaxial cable. Available in both standard and PoE applications, the mini CopperLine units will allow extended distance over copper to be used in applications where space is extremely limited. Automatically configured as remote units, and with user configurable selection of 10 Mbps or 100 Mbps speed these units are simple to install.

Specifications

Ethernet

• Data Interface - 10/100BaseT(X) Ethernet
• Data Rate - DIP switch selection of 10/100 Mbps Full data rate / full duplex up to the maximum rated distance
• RFC - 2544 TCP/IP Packet Transmission
• Standards - IEEE 802.3af PoE (CLRFE1EOCP/M), RFC: 768 UDP, 2068 HTTP, 793 TCP 791 IP, 1783 TFTP, 894 IP over Ethernet.
• Transmission Distances - See chart below

Connectors

• Ethernet - RJ-45
• Extended Distance - Pigtailed BNC
• Operating Power - Powered by PoE

Power

• CLRFE1EOCP/M - Runs off PoE pass-through only
• Power Consumption - 1.5 W
• Current Protection - Automatic Resettable Solid-State Current Limiters

Mechanical

• LED Indicators
  • Operating Power
  • Ethernet Link and Activity
  • Extended Link and Activity
• Circuit Board - Meets IPC Standard
• Size (LxWxH) - 2.3 x 1.6 x 1.1 in (5.7 x 4.1 x 2.8 cm)
• Shipping Weight - <1 lb / 0.45 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - – 40˚ C to +75˚ C UL Safety certifications conducted at maximum ambient temperatures (Tma) of 65°C.
• Storage Temp - – 40˚ C to +80˚ C
• Relative Humidity - 0% to 95% (non-condensing)

CLRFE1EOCP-M Specifications PDF

CLRFE1EOCP-M Installation Manual