HDBT4X3 Vanco HDBaseT 4 x 3 Matrix with 3 Receivers with Additional 1 HDMI Output

HDBT4x3 is a professional HDBaseT Matrix Switcher that consist of the following inputs and outputs, 4 HDMI IN (4kx2K@60Hz signal at max), 3 IR IN, 1 IR EYE, 4 IR OUT, 3 HDBaseT OUT, 1 HDMI OUT, 1 SPDIF OUT, 1 L&R RCA OUT, and TCP/IP, RS232 control port via phoenix connector. The HDBaseT Receiver is an HDBaseT Receiver that consists of the following inputs and outputs, 1 HDBaseT IN, 1 IR IN, 1 IR OUT and HDMI OUT. The receiver is powered directly by the Matrix Switcher. All HDMI inputs can be selected by either the front panel buttons, IR, RS 232 or GUI. The selected source is delivered to HDBaseT zoned outputs 1~3 & HDMI Output. The Matrix Switcher is capable of delivering 4K signals up to 40m, 1080p up to 70m and powering the receivers via a single CAT5e cable. It is however recommended to use good quality CAT6 cable.

Specifications

• Input - 4 HDMI
• HDMI Standard - Support HDMI1.4 & HDCP2.2 and is backward compatible with all previous standards.
• Output - 1 HDMI – 3 HDbaseT
• Input and Output Level - T.M.D.S. 2.9V~3.3V
• Input and Output Impedance - 100Ω (Differential)
• HDMI Standard - Support HDMI1.4 & HDCP1.4 and is backward compatible with all previous standards.
• Video Signal - HDMI (or DVI-D)
• Transmission Distance - 1080P@60Hz ≤70m; 4Kx2K@60Hz ≤40m
• Resolution Range - Up to 4Kx2K@60Hz
• EDID Management - In-built EDID data and manual EDID management
• Gain - 0 dB
• Bandwidth - 10.2Gbit/s
• Switching Speed - 200ns (Max.)
• Output Signal - Stereo audio, Digital audio
• Analog Audio Output - Support PCM
• Digital Audio Output - Supports PCM, Dolby, DTS, DTS-HD
• Frequency Response - 20Hz~20KHz
• Output Connector - 1 L&R(RCA) 1 SPDIF
• Control Ports - 4 IR OUT, 3 IR IN, 1 IR EYE, 1 TCP/IP (female RJ45), 1 RS232 (3-pin pluggable terminal block)
• Panel Control - Front panel buttons
• RS232 Control - 3-pin pluggable terminal block
• IR - Extended IR receiver
• TCP/IP Control - Web-based GUI
• Power Supply - Input: 100-240V~, 50/60Hz; Output: DC 24V 2.71A
• Power Consumption - 35W (Max)
• Temperature - 0~+50 Degrees C
• Reference Humidity - 10% ~ 90%
• Net weight - 910g

HDBaseT Receiver

• Input - 1 HDBaseT; Female RJ45(with LED indicators)
• Output - 1 HDMI; Female HDMI
• Control - 1 IR IN, 1 IR OUT; 3.5mm mini jacks
• Resolution Range - Up to 4Kx2K@60Hz
• Transmission Distance - 1080P@60Hz ≤70m; 4Kx2K@60Hz ≤40m
• Bandwidth - 10.2Gbps
• HDMI Standard - Support HDMI1.4 and HDCP1.4
• Temperature - 0~ +50 Degrees C Humidity:10% ~ 90%
• Power Supply - Powered by 4K HDBaseT Matrix Switcher.
• Net Weight - 280g

HDBT4X3 Specifications PDF