POE48 Nitek Power Over Ethernet Card

The POE48 series 4 Channel PoE Crossover and Power Insertion Card is designed for use with the CX452 Modular Card Cage (purchase separately).

The POE48 crossover and power insertion card is a unique component of the UTPLinks system. The POE48 card can provide power for up to four PoE cameras. The POE48 also provides the means to connect the four IP cameras to a network device; i.e. hub, switch, etc. Up to five POE48 cards may be plugged into a CX452 chassis to power a total of twenty cameras, or any combination of In this way the UTPLinks system may be used to power and crossover both IP and standard analog cameras in the same structured cabling network. The CX452 is a 1 RU card cage which is powered from a separate PS110 power supply (purchase separately).

Specifications:

• Model Number - POE48
• Size - 1 horizontal card slot (5 slots total CX452 card cage)
• Power Requirements - Supplied by PS110 Power Supply
• Power Output - 48VDC @ 15.4 WATTS/PORT
• Twisted Pair Connection (vertical runs) - RJ45 connector
• Twisted Pair Connection (horizontal runs) - RJ45 connector
• UTP Cable - Category 5 or better
• Temperature Range - 0 degrees C to +55 degrees C
• Humidity Range - 0 to 95%, non-condensing
• Shipping Weight - 1 lb

POE48 Spec Sheet