TCM PulseWorx - Telephone Control Module, 2 Lines, Detects Ring

Telephone Control Module (TCM)The TCM Telephone Ring Interface Module is a small plug-in device designed to sense a telephone ring to trigger the transmission of digital commands onto the existing powerlines.
The TCM can be programmed to send any UPB link command to turn on or off (or blink) any light or group of lights upon the ringing of a telephone. Great for the hearing impaired!
The TCM plugs into any standard AC power receptacle. The TCM includes two standard phone jacks for connecting as many as two different phone lines.

Specifications

ELECTRICAL

• Power Requirements - Primary: 120 Volts AC, 50/60Hz
• Transmission Channels - 2 Links/Scenes
• Connections/Power Wire - Power outlet plug-in
• Standby Power Consumption - .8 Watts
• Environmental Conditions
  • Indoor Use Only
  • Temperature: -40° to 104°F (-40° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• LED Indicators - One per button; LED reflects status of Group
• IR Receiver - No
• During Power outage - Retains all settings in Non-volatile EERPOM
• Set-Up Mode - Press setup button 5 times

MECHANICAL

• Button Type - N/A
• Wire Nuts - N/A
• Mounting - Outlet plug-in
• Dimensions - Height: 3.00 in Width: 2.00 in Depth: 1.25 in
• Weight - 5.0 oz.
• Warranty - 5 years