WS1E-3-W PulseWorx - Electronic Low Voltage Dimmer/Switch, 300VA - White

The WS1E ELV Wall Switch Dimmer is a high quality home automation switch dimmer used control electronic low voltage AC lighting ballasts or transformers. It is also capable of transmitting and receiving digital UPB commands over the existing powerlines.
The WS1E is perfect for controlling electronic low voltage AC lighting ballasts and transformers.

Specifications

ELECTRICAL

• Power Requirements- Primary: 120 Volts AC, 50/60HzNeutral Wire- Required
• Load Type - Electronic Low Voltage
• Transmission Channels- 2 Links/Scenes
• Connections/Power Wire
  • Two 16 AWG gauge 105 C insulation
  • Black – Hot/Line
  • White – Neutral
  • Red - Load
  • Yellow - Traveler wire (with RWS)
  • Ground - 18 AWB stranded copper
• Standby Power Consumption- <.8 Watts
• Environmental Conditions
  • Indoor Use Only
  • Temperature: -40° to 140°F (-40° to 60°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• Status LED Modes- All programmable with UPStart Blue, Red Magenta or Of
• LED Indicators- One per button; LED reflects status of Group
• During Power outage- Retains all settings in Non-volatile EERPOM
• Set-Up Mode - Tap Top or Bottom Rocker 5 Times - LED will Blink

MECHANICAL

• Button Type- 2 Momentary contact type buttons
• Wire Nuts- 4 included
• Mounting- Single Gang or multiple-ganged junction box
• Dimensions-
  • 300VA -Height: 4.25 in Width: 2.50 in Depth: 1.37 in
  • 500VA- Height: 4.25 in Width: 2.75 in Depth: 1.37 in
• Weight- 5.0 oz
• Warranty- 5 years