791-44 Xantech One-Zone Ten Source Amplified Connecting Block

The 791-44 is an amplified connecting block that permits any combination of up to ten single or dual IR emitters, driven directly, at high or low output levels. Expandable to 100 emitter ports. Requires either the 781ERGPS or 782ERGPS Power Supply.

Specifications

• 4-screw plug-in terminal for +12VDC, GND, STATUS, & IR IN
• Quick connect "IR RCVR" input (3.5mm mini stereo jack)
• Red talk-back LED flashes with IR input signal
• Ten EMITTER output ports, parallel driven (3.5mm mini mono jacks)
• HIGH IR OUT port for emitter expansion (3.5mm mini mono jack). See Fig. 5
• Use of included jumpers connect either a 100 or a 470-Ohm resistor in series with each emitter jack for high or low power operation
• 282/283/284/286 series of Emitters may be used in any combination
• Power requirements: 12 volts DC. Uses 781RG or 782-00 Power Supplies (see item 3 below)
• 2.1 mm coaxial power jack
• Dimensions: 6" W x 2-1/4" D x 15/16" H

Shipping Info

• Length - 6.3 (Inches)
• Width - 3.1 (Inches)
• Height - 1.5 (Inches)
• Weight - 0.65 (Lbs)
• Unit of Measure - Each
• UPC - 042777791446

791-44 Manual