LDS-120V Pulseworx LED Dimming Stabilizer

A solution for your LED fixtures and bulbs having issues turning off completely and flickering at certain dim levels. We have found that by inserting a small load resistor (LDS-120V) in parallel with the LED load it frequently eliminates these problems.

Specifications

Model

• LDS-120V - LED Dimming Stabilizer - 120V

Electrical

• Power Requirements - 120VAC 50Hz/60Hz
• Connections/Power Wire - Two 16 AWG gauge 105 C insulation, Red – Load, White – Neutral
• Environmental Conditions - Indoor Use Only or water-proof enclosure, Temperature: -40° to 194°F (-40° to 90°C), Humidity: 10% to 90% RH (non-condensing)
• Certifications - Safety tested for USA and Canada to ETL tested to UL508, UL-508-2010 CSA C22.2 #14-2010

Operation

• Filtering - Cuts off certain LED fixtures/bulbs residual load (very dim) when turning switch off (0% Level).
• Status LED Modes - None
• LED Indicators - None
• During Power outage - None
• Set-Up Mode - None required

Mechanical

• Button Type - None
• Mounting - Wired
• Dimensions - Height: 2.0 in Width: 0.50 in Depth: 0.50 in
• Weight - 1 oz.
• Warranty - 5 years
• US Patent No. - 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.

LDS-120V Specifications PDF

LDS-120V Manual