FRS2020 Nitek 19" 2U Rack Mount Chassis with Dual Power Supply

The Nitek FRS2020 unit provides a means for easy rack mounting of individual fiber modules, from the 2000 Series system. The FRS2020 uses the standardized dimensions for a 19 inch 2U rack mounted chassis. The chassis can accommodate any combination of up to 16 fiber card modules from the 2000 Series system. The chassis design supports ‘hot swapping' of the ‘plug and play' fiber cards, allowing the system to be powered up while cards are removed and installed.
The FRS2020 is configured with dual power supplies. Both power supplies work independently from each other. In the case of a major power supply failure by one of the power supplies the other supply will continue to provide the proper power required for the system. There is a power status LED on each of the supplies, along with an audible alarm. This dual power supply rack design provides an easy means of increased system reliability for extended continuous operation.

Specifications

• ChassisCabinet - 19" Standard rack mount 2U x 9.5"D
• Power Supply - 2 units in back to back operation
• Card Slots - 16 total card positions
• Power Cords - 2 Standard Equipment Power Cords
• Power Supply - Auto-Ranging
• Input Voltage - 100 to 265VAC @ 47 to 63Hz
• Input Power - 100 Watts
• Output Voltage - 5Vdc (±6%, -2%) @ 15Amps
• LED Indicators
  • Normal Operation - Green
  • Faulty non-operational - Red
• Audible Alarm - Signals Faulty Power Supply
• Operating Temperature - -10°C to 55°C / 14°F to 131°F
• Storage Temperature - -40°C to 85°C / -40°F to 185°F
• Relative Humidity - Up to 95% non condensation
• Dimensions (L x W x H) - 9.5" x 19" x 3.5" Including Tabs & BNC 241 x 483 x 89mm
• Shipping Dimensions - 13.5" x 20.5" x 6" 343 x 521 x 153mm
• Shipping Weight - 10.0lbs / 4.5Kg

FRS2020 Specifications PDF

FRS2020 Installation Manual