PSA16U-480POE Phihong PoE Mid-Span Power Injector - 1000pc Minimum

Specifications:

• Model Number - PSA16U-480
• AC Input Voltage Range - 90 to 264VAC
• AC Input Voltage Rating - 100 to 240VAC
• AC Input Current - 0.5A(RMS) max. for 90VAC. 0.35A(RMS) max. for 240VAC.
• Leakage Current - 0.25mA max. @ 254VAC 60Hz
• AC Input Frequency - 47-63Hz
• AC Inrush Current - 15A(RMS) max. for 115VAC. 20A(RMS) max. for 230VAC.
• Total Output Power - 15.4W
• Efficiency - 65% (typical) at Max. load, and 120VAC 60Hz
• Hold-up Time - 16mS min. 120VAC and max. load
• Transient O/P Voltage Protection - 60V max. at switch on and off at any AC line Phase
• Operation Temperature - 0 to +40C
• Non-operation Temperature - -25 to +65C
• Operation Humidity - 5 to 90%
• EMC - FCC Part 15 Class B. EN55022 Class B.
• Isolation Test - Primary to Secondary: 3000VAC for 1 minute 10mA. Primary to F.G.: 1500VAC for 1 minute. Output to F.G.: 1500VAC.
• Immunity EN50082-1 - ESD: EN61000-4-2. Level 3. RS: EN61000-4-3. Level 2. EFT: EN61000-4-4. Level 2. Surge: EN61000-4-5. Level 3. CS: EN61000-4-6. Level 2. Voltage Dips EN61000-4-11. Harmonic: EN61000-3-2.
• Insulation Resistance - Primary to secondary: >10M OHM 500VDC. Primary to FC: >10M OHM 500VDC.
• Over Voltage/Current, Short Circuit Protection - The output can be shorted permanently without damage
• Indicators - Led #1 indicator for input power "on" GREEN
• Input Connector - IEC320 inlet 3 pin
• Data Connector - RJ45 +48V pins4&5, Power Return pins7&8

PSA16U-480 Spec Sheet