POE75U-1UP-N Phihong 75W Power over Ethernet Adapter Ultra Power over Ethernet Single Port Injector with NIC

• AC Input Voltage Range - 90 to 264VAC
• AC Input Voltage Rating - 100 to 240VAC, 47-63 Hz
• AC Input Current - 2.0A (RMS) maximum for 90VAC, 1.2A (RMS) maximum for 240VAC
• Leakage Current - 3.5mA maximum @ 254VAC 60Hz
• AC Inrush Current - 30A (RMS) maximum for 115VAC, 60A (RMS) maximum for 230VAC
• Total Output Power - 75W
• DC Offset - No Data degradation with DC imbalance 18mA per min.
• Efficiency - 80% (typical) at maximum load, and 120VAC 60Hz
• Hold Up Time - 10mS minimum 120VAC and maximum load
• Transient O/P Voltage Protection - 60V maximum
• Temperature -
• Operation: -20 to +40°C
• Non-Operation: -25 to +65°C
• Humidity Operation - 5 to 90%
• EMC - FCC Part 15 Class B, EN55022 Class B
• Immunity -
• ESD: EN61000-4-2. Level 3
• RS: EN61000-4-3. Level 2
• EFT: EN61000-4-4. Level 2
• Surge: EN61000-4-5. Level 3
• CS: EN61000-4-6. Level 2
• Voltage Dips EN61000-4-11
• Harmonic: EN61000-3-2
• Isolation Test -
• Primary to Secondary: 4242 VDC for 1 minute
• Primary to Field Ground: 2121VDC for 1 minute
• Output to Field Ground: 2121VDC
• IEEE 802.3af/at Interoperability - If 25kohm is detected the unit operates in "IEEE802.3at mode" 33.6W 2 pair powering. 12.5k detection resistance required for full power
• Insulation Resistance - Primary to Secondary: >10M OHM 500VDC/Primary to Field Ground: >10M OHM 500VDC
• Cisco Legacy Detection - No external parts required for Legacy devices.
• Short Circuit Protection - Outputs equipped with short circuit protection and overload protection.
• Input Connector - IEC320 inlet 3 pin
• Weight - 0.5 Kg
• Size - 166mm x 80 x 44
• Warranty - 1 Year

POE75U-1UP Specifications PDF