COMPAK41M1 Comnet FVT/R41M1 4 Channel Video MM 1 Fiber

The ComNet FVT41M1 and FVR41M1 multiplexers simultaneously transmit four channels of video over one optical fiber utilizing state-of-the-art digital encoding and decoding for high-quality video transmission. These environmentally hardened units are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• # Input/Output Channels - 4
• Bandwidth (minimum) - 10 Hz - 6.5 MHz
• Differential Gain - <4%
• Differential Phase - <0.7°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 57 dB Typical
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
• Wavelength - 1310 nm, Multimode
• Number Of Fibers - 1

Connectors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)

Led Indicators

• Video Present
• Optical Carrier Detect
• Power

Power

• Surface Mount - 8-15 VDC
• Power Consumption - 3W

Electrical & Mechanical

• Number of Rack Slots - 1
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (LxWxH) - 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

COMPAK41M1 Specifications PDF

COMPAK41M1 Manual