COMPAK412M1 Comnet FVT/R412M1 4 Channel Video 2 Channel Data MM 1 Fiber

The ComNet FVT412M1 and FVR412M1 transmit four channels of video utilizing state of the art digital encoding and decoding for high-quality video transmission, along with two channels of bi-directional data over one multimode optical fiber. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The FVT/FVR412 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, RS422 and RS485 (2 & 4 Wire) data. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are required.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• # Input/Output Channels - 4
• Bandwidth (minimum) - 10 Hz - 6.5 MHz per channel
• Differential Gain - <4%
• Differential Phase - <0.7°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 57 dB Typical
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

• Data Channels - 2
• Data Interface - RS232, RS422 and RS485 (2W/4W)
• Data Format - NRZ, NRZI, Manchester, Bi-Phase and Sensornet
• Data Rate - DC-250 Kbps (NRZ)
• Bit Error Rate - <1 in 10-9 @ Maximum Optical Loss Budget
• Operating Mode - Simplex or Full-Duplex

Contact

• Contact Interface - Response Time: 0.5 msec
• Input - Dry Contact Closure
• Output - SPST Relay, 0.5 A Contact Rating – normally open
• Wavelength - 1310/1550 nm, Multimode
• Numver of Fibers - 1

Led Indicators

• Video Sync Presence for Each Video Channel
• Received Data
• Transmitted Data
• Optical Carrier Detect
• Optical Emitter - Laser Diode

Connectors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)
• Data - Terminal Block
• Contact - Terminal Block

Power

• Operating Voltage Range - 8 to 15 VDC
• Power Consumption - 4W

Electrical & Mechanical

• Number of Rack Slots - 2
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (LxWxH) - 6.1 x 5.3 x 3.3 in., (15.5 x 13.5 x 8.3 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

COMPAK412M1 Specifications PDF

COMPAK412M1 Manual