C60 Bogen Classic Series 60W Public Address Amplifier

The Bogen Classic Series Models C60 are public address mixer amplifiers that provide mixing of microphones, telephone, and auxiliary sources. Output screw terminals are provided for 4-ohm (direct) and 8-ohm (C35 & C60 models only), 16-ohm, 25V and 70V (transformer-coupled) speaker systems. Output jacks let you connect to a tape recorder or an additional booster amplifier, or feed a 600-ohm telephone line when an accessory transformer (Model WMT1A) is used.

Specifications

• Power Output (RMS) - C60
• Rated - 60W
• Frequency Response & Distortion
  • Transformer - 70 Hz-16 kHz (± 2 dB) @ 1% max.
  • 4-Ohm Direct Output - 20 Hz-20 kHz (± 1 dB) @ 0.5% max.
• Hum and Noise
  • MIC - 55 dB below rated output
  • AUX - 70 dB below rated output
  • TEL - 70 dB below rated output
• Input Sensitivity
  • MIC - Lo-Z Balanced 600μV
  • AUX - 85mV
  • TEL - 75mV
• Outputs
  • 8 ohms (C35 & C60 models only)
  • 16 ohms, 25V, 70V transformerisolated balanced or unbalanced
  • 4 ohms direct unbalanced
• Output Connections
  • Screw terminal strip, TAPE/BOOSTER jack
  • WMT1A jack (requires accessory transformer)
• Input Connections - Screw terminals for MIC and TEL, two AUX Hi-Z jacks
• Controls
  • MIC1, MIC2/AUX (switch selected)
  • AUX 2, BASS, TREBLE, TEL, VOX
• Thermal Emissions - C60 - 228.8 BTU/hr.
• Tone Control
  • Treble, ±11 dB @ 10 kHz
  • Bass ±11 dB @ 100 Hz
• Power Requirements
  • 120V AC, 60 Hz
  • C60 - 148W
• Dimensions - 14-1/2" W x 3-3/4" H x 11" D
• Product Weight - C60- 17 lb.

C60 Specifications PDF

C60 Manual