VAD-PPW Veracity PINPOINT Wireless IP Camera Set-up Adaptor with Wireless Network Link

PINPOINT Wireless makes POE IP camera installation easy by adding a wireless link near the camera, allowing connection to a smartphone, tablet or laptop for local image display

Specifications

• Type - Device is powered via pass-through POE
• Consumption - < 2W in normal use

• Wired network interface - ‘POE In' port: 10Base-T/100Base-TX ‘POE Out' port: 10Base-T/100Base-TX
• IP setting - Automatic or manual configuration of IP address (IPv4)
• Wireless network interface
  • IEEE 802.11b/g/n/ac
  • 2.4GHz b/g/n (default) – channels 1, 6 or 11
  • 5GHz a/ac/n – channels 36, 40 or 44
• Wireless - SSID User configurable
• Wireless security - WPA2-PSK with user configurable password

• POE status indicator - Red LED shows ON, flash indicates error, off indicates no POE
• Network port LEDs - Green: Link speed, Orange: Network activity
• Wireless indicator - Blue LED ON shows wireless link on; flash indicates booting up
• Network connectors - 2 x RJ45, POE In, POE Out (to camera)

• Camera discovery - Automatic camera discovery using Bonjour or WS-Discovery (ONVIF)
• Supported IP cameras - All IP cameras supporting live-viewing via browser on smart device or with RTSP url address and CAMPOINT Smart App

• Enclosure type - High impact ABS
• Lanyard - Hooks onto PINPOINT Wireless with Carabiner - safety breakaway clasps
• Case - Protective zipper case
• Dimensions - L 128mm W 82mm H 28mm
• Weight - 128g [4.51 oz]
• Operating temperature - -10°C to 70°C [14°F to 158°F]
• Relative humidity - Up to 85%, non-condensing

• Pinpoint Wireless unit - EN 55032 Class A, FCC Part 15 Subpart B Class A,IEC/EN/UL 60950-1, CE, RoHS, REACH, WEEE

• VAD-PPW - PINPOINT Wireless IP Camera set-up adaptor with wireless network link

VAD-PPW Specifications PDF