FP-2500E TAKEX 33' Ultraviolet Flame Sensor and 33' Dual Element PIR Sensor Relay Output N/O - N/C Power 10 - 30VDC

A combination UV flame sensor and wide-angle PIR with up to 10m flame and intrusion detection for safer indoor protection of your premises.

Specifications

• Product name - FLAME PASSIVE SENSOR
• Model No. - FP-2500E
• Detection system - Ultraviolet rays (Detection wave length 185 to 260nm)
• Detection distance - 33' (10m), 2.75"(7cm) lighter flame in front
• Detection area angle - Approx. 120° conically
• Detection setting - Detection timer (1sec, 3sec) Detection sensitivity (H [100%], L[50%]) *Detection sensitivity can be set at only "Individual" mode, *H[100%] is fixed at "AND" mode
• Alarm LED (RED) - Part of flame sensor, Lighting at alarm (Detection time + off delay. Approx. 2 sec), Blinking (3 min) and Lighting (47 min) at memory
• Detection system - Passive infrared
• Detection area - Wide Angle 33'(10m) Max. 29 pairs
• Detection area angle adjustment - 3 steps
• Alarm LED (RED)
  • Part of passive sensor
  • Lighting at alarm (One shot, Approx. 2 sec.)
  • Blinking (3 min) and Lighting (47 min) at memory
  • Lighting at trouble.
• Power supply - 10V to 30VDC (non-polarity)
• Current consumption - 20mA Max.
• Alarm output
  • Individual mode Flame sensor output (From ALARM① terminal)
  • Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
  • Contact operation : Detection time + off delay. (Approx. 2 sec.)
  • Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load)
  • Passive sensor output (From ALARM② terminal)
  • Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
  • Contact operation : One shot (Approx. 2 sec.)
  • Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load) AND mode
  • Forced flame signal output (From ALARM① terminal) When the flame sensor detects a flame twice during the selected AND timer.(Detection time + off delay. Approx. 2 sec.)
  • Or When the flame sensor continues to detect a flame for flame duration time 15 or 30 sec. (Detection time after 15/30 sec + off delay. Approx. 2 sec.)
  • Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
  • Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load) AND detection signal output (From ALARM② terminal) When both passive and flame sensors detect during the selected AND timer. (Detection time, Min. 2 sec.)
  • Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
  • Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load)
• Tamper output - Dry contact relay N.C. (Activated when the front cover is detached) Contact capacity : 30V (AC/DC) 0.1A Max. (resistive load)
• Alarm memory - Reset after blinking (3 min) and lighting (47 min) (Operate flame and passive LED individually)
• Ambient temperature range - 5°F to+131°F (-15°C to +55°C) without condensation
• Mounting position - Indoor wall surface (Ceiling with option attachment "BCW-401")
• Connections - Self-up terminal
• Weight - Approx. 120g
• Appearance - Resin

FP-2500E Specifications PDF