NW1-M Comnet Industrially Hardened Mini Point-to-Multipoint Wireless Ethernet Unit

The NetWave industrially hardened wireless Ethernet transmission link can be configured through the embedded User Interface as a Client or as an Access Point. This point-to-multipoint model allows multiple Ethernet endpoints to be connected to a central Access Point. Up to 15 endpoints can be linked to a central access point. The NW1/M support up to 95Mbps throughput using MIMO technology. The units can be powered by an IEEE 802.3af PoE compliant device or through thesupplied power injection module. The NW1/M is FCC certified for use in North America and TPC certified for use in the European Union. These links are an ultra-small form factor addition to the ComNet NetWave product family.

Specifications

Wireless Radio

• EIRP - Up to +36dBm for point to multipoint deployments, +42dBm for point to point deployments with MAC-lock feature enabled
• RF Output - +26dBm Rated Transmit er
• Operational Frequency - 5180MHz – 5825MHz, Region-dependent. Not all frequencies are supported in all regions. Contact ComNet for frequencies supported in your region.
• Bandwidths - 20 and 40MHz

Standard Internal Antenna

• Antenna Internal - 16dBi Dual Polarized Directional
• Gain - 16dBi
• Azimuth - 30° Horizontal/Vertical
• Elevation - 30° Horizontal/Vertical

IA870 Optional Internal Antenna

• Antenna - Internal 8dBi Dual Polarized Directional
• Gain - 8dBi
• Azimuth - 70° Horizontal/Vertical
• Elevation - 30° Horizontal/Vertical

Connectors

• 10/100 Ethernet - RJ-45, Sealed Cable Gland

Software Features

• Addressing - Static IP / DHCP Client / DHCP Server
• SNMP - V3
• Telnet Server - Syslog
• Dynamic DNS - 802.1q VLAN support
• Embedded Firewall - QoS support
• Ability to Assign Static Routes - NTP Client
• Spanning Tree Protocol support
• 802.1x Port-Based Network Access Control
• User-Configurable Watchdog and Auto-Reboot Mechanism
• Multi-Level Configuration and Monitoring Login Accounts
• User Configurable Long Range Parameters

Power

• Operating Voltage - 42 to 57 VDC
• Power Consumption - 5.5 W Max
• PD Power - IEEE802.3af PD compliant

Mechanical

• Indicating LEDs - Power On Ethernet Link Signal Strength
• Size (L x W x H) - 7.4 x 7.4 x 2.2 in (18.5 x 18.5 x 5.6 cm)
• Shipping Weight -<3.9 lb / 1.75 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 5% to 95%, non-condensing

NW1-M Specifications PDF