O4VD2G Speco Technologies 2.8mm 30FPS @ 4MP IR Day/Night WDR People & Vehicle Detection Dome IP Security Camera 12VDC/POE

Specifications

Camera Specifications

• Image Sensor – Progressive scan 1/3” CMOS, 4MP
• Maximum Resolution – 2560 x 1440
• Minimum Illumination – 0.005 lux @ F1.6 AGC ON; 0 lux with IR
• Field of View – 94° (H), 50° (V), 115° (D)
• Compensation – True WDR, BLC, HLC
• Day/Night – Smart IR
• Electronic Shutter Speed – 1/2s – 1/100000s
• DNR – 3D DNR
• Angle Adjustment – Pan 0° ~ 355°, Tilt 0° ~ 67°, Rotation 0° ~ 180°

Video Specifications

• Main Resolutions – 2560 × 1440; 2304 x 1296; 1920 × 1080 @ 30fps
• Sub Stream – 720p (1-15fps), D1, CIF (1-30fps)
• Third Stream – D1, CIF, 480 x 240 (1-30fps)
• Video Settings – Region of interest, saturation, brightness, chroma, contrast, wide dynamic, defog, sharpen, noise reduction
• Compression – H.265, H.264
• Bitrate Control – VBR, CBR (64Kbps ~ 5Mbps)
• Multiple Streaming – 3 streams

Network Specifications

• Protocols – UDP, IPv4, IPv6, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, 802.1x, UPnP, HTTPs, HTTP, QoS
• DDNS Support – Speco DDNS (free of charge)
• Security – User ID & password protection, IP/MAC address filtering, digest authentication
• User Access – Max. 3 simultaneous users; actual number of users may vary depending on bandwidth

Interfaces

• Ethernet – 10/100 Mbps (RJ45 Jack)
• Power – DC jack
• Card Slot – MicroSD, up to 256GB (not included)
• Reset – Yes
• Audio In – 3.5mm input, Built-in mic
• Audio Out – No
• Alarm In/Out – No

Client Specifications

• Web Browser Support – Chrome, Edge, Safari, Firefox, Internet Explorer
• PC Application – SecureGuard® VMS, SecureGuard® CMS
• Mobile – Speco Blue App, SecureGuard® Client (iOS and Android)

System Specifications

• PoE Standard – IEEE 802.3af
• Detection Events – Line crossing, object detection, region intrusion, people/vehicle detection and video blurring detection
• Alert Triggers – Motion detection, SD card error, detection events
• Image Settings – Watermark, IP address filtering, video mask, password protection, corridor mode

Operating & Unit Specifications

• Power – PoE, 12VDC (power supply not included)
• Power Consumption – <6W
• Operating Temperature – -40°F - 140°F
• Operating Humidity – Less than 95% (non condensing)
• Unit Dimensions – 4.6” (dia.) x 3.54” (H)
• Unit Weight – 1.38 lbs. (without junction box)
• Certifications – FCC