AVN-SFPL2 AVYCON SFP Gigabit Fiber Transceiver Module to RJ45 Connection

1000 BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3 . The 1000 BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features. 1000 BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. The 1000 BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features. It supports a SERDES, does not have a link indication feature，and 1000BASE-X auto-negotiation should be disabled on host system

Specifications

• Supply Current - typ. 320 mA
• Input Voltage - typ. 3.3 V
• Maximum Voltage - 4 V
• Surge Current - 30 mA
• SFP Output LOW - 0 V ~ 0.5 V
• SFP Output HIGH - host_Vcc -0.5 V ~ host_Vcc + 0.3 V
• SFP Input LOW - 0 V ~ 0.8 V
• SFP Input HIGH - 2 V ~ Vcc + 0.3 V

High-Speed Electrical Interface, Transmission Line-SFP

• Line Frequency - typ. 125 MHz
• Tx Output Impedance - typ. 100 Ohm
• Rx Input Impedance - typ. 100 Ohm

High-Speed Electrical Interface, Host-SFP

• Single ended data input swing - 250 mV ~ 1200 mV
• Single ended data output swing - 350 mV ~ 800 mV
• Rise/Fall Time - typ. 175 psec
• Tx Input Impedance - typ. 50 Ohm
• Rx Output Impedance - typ. 50 Ohm

General

• Data Rate - 10 Mb/sec ~ 1000 Mb/sec
• Cable Length - 100 m
• Commercial Case Operating Temperature - 0°C ~ 70°C
• Extended Case Operating Temperature - -10°C ~ 80°C
• Industrial Case Operating Temperature - -40°C ~ 85°C
• Storage Temperature (ambient) - -40°C ~ 85°C
• Dimensions (W x L x H) - (68mm x 13mm x 13mm)

AVN-SFPL2 Specifications PDF