ESUL5-WA KBC Unmanaged Industrial Ethernet Switch 5 Copper Ports

The KBC ESUL5 Ethernet series is an entry level, ultra low power, unmanaged industrial switch. The series is designed for use in a wide range of operating temperatures in non–environmentally conditioned, industrial applications. The switch provides connectivity for up to five 10/100 Mbps twisted pair copper ports which are automatically configured and, with plug-and-play design, provides ease and speed of installation. The series is available in either DIN rail or wall-mount configurations.

Standards

• IEEE Standard
  • IEEE 802.3 10BASE-T
    
  • IEEE 802.3u 100BASE-TX
    
  • IEEE 802.3x Full Duplex

Switch Performance

• Switching Method - Store & forward
  
• Transfer Rate - 148,810 pps
  
• Backplane Switch Capacity - 1 Gbps
  
• Mac Address Table - 2k
  

Power

• Power Input - 12-48 Vdc, Dual Redundant
  
• Power Supply - Input: 100~240 Vac Output: +24V dc
  
• Power Consumption - <2.2W

Mechanical

• Casing - IP40 protection
  
• Dimensions (W x H x D) - 30mm x 115mm x 92mm ( 1.18" x 4.52" x 3.6")
  
• Weight - 700g
  
• Installation -Wall-mount or DIN rail

Environmental

• Operating Temperature - - 40°~+74°C / -40°~+165°F
  
• Storage Temperature - - 40°~+74°C / -40°~+165°F
  
• Operating Humidity Mean Time - 5 to 95% non-condensing
  
• Between Failure (MTBF) ->300,000 Hours

Connectors

• 10/100 Electrical - 5 x RJ45
  
• Power - 5-way screw block terminal

Approvals

• IEC61000-4-2(ESD) - ±8kV Contact discharge, ±15kV air discharge
• IEC61000-4-3(RS) - 10V/m, (80–2000 MHz)
• IEC61000-4-4(EFT) - Power line ±4kV, Data line ±2kV
  
• IEC61000-4-5(Surge) - N-N: 2kV N-G:4kV (1.2 / 50μs, 80/20μs) Data line ±2kV
  
• IEC61000-4-6(CS) - 3V (10kHz - 150kHz); 10V(150kHz - 80MHz) 10V (150 kHz-80 MHz)
  
• IEC61000-4-16 (Common Mode Conduct) - 30V cont. 300V, 1s
  
• FCC Part 15, CISPR (EN55022) IEC61000-6-2 (Industrial Standards) EN50121-4, EN50155 (Railway Applications) - Class A
  

ESUL5-WA Spec Sheet