FPCRD-SCSMP-0000-100 HID FlexCard Standard Card 125 kHz Clamshell type Proximity Card Standard Programmed Low Frequency 125 kHz - exact coding standard with no gaps or over-runs Custom Artwork on file or new Standard Embossed Side with embossed Indala logo (Standard) = Position 3/Embossed Side with slot punch to the right lower right corner Printable matt finish - No varnish no logo surface will accept post printing No Artwork - 100 Pack

HID's Indala FlexCard standard clamshell card is "credit card" length and width, features beveled edges, and can accept photo-flap and direct-print adhesive-backed ID badge overlays. The Indala FlexCard can be programmed in the factory or in the field using the Indala ProxSmith Programmer and Toolkit with Wiegand, magnetic stripe and serial data formats. Indala's FlexCard can be used interchangeably with other Indala credentials on most systems and can be ordered with specified facility codes and ID numbers. HID Indala's competitively priced FlexCard delivers the number sequence ordered with no gaps and with no under or overruns. Exclusive FlexSecur Security Technology All HID Indala 125 kHz Proximity Cards feature FlexSecur technology, providing an added level of access system security through a verification process at the reader. A unique feature of the HID Indala product line, FlexSecur screens out unauthorized cards prior to sending card data to the host system

This additional verification step enhances the security of your access system in two ways: The entire card data field is encrypted prior to programming the card. Therefore, the data on the card cannot be decoded to determine the actual information on the card. Only the reader is able to decrypt the data and transmit it to the access control system. Cards and readers can be programmed uniquely for each site, protecting the end user against unauthorized entry attempts by using cards from another facility. Again, this is unique to the HID Indala product line.

Specifications

• Standard Part Number - FPCRD-SSSMW-0000
• Description - 125 kHz, Indala logo (front), embossed Indala logo (back), inkjet marking on embossed side (lower right corner with slot to the right), vertical slot punch, no artwork.
• Dimensions - 3.38"H x 2.13"W x 0.065"T (86 mm x 54 mm x 1.8 mm)
• Weight - 0.4 oz (12 g)
• Module - Slim/Wallswitch
• Typical Maximum Read Range - Up to 5" (12 cm)
• Cover Design - Linear/Arch/ Curve/Wave
• Operating Temperature - -22° F to 149° F (-30° C to 65° C)
• Inkjet Marking - Includes sales order number and ID number matching internal ID.
• Custom Graphics - Available on FlexCard with customer-supplied artwork.
• Slot Punch - Vertical
• Coding - Wiegand, ABA Track II Magnetic Stripe, others available (exact coding standard, with no gaps or over-runs)
• Programming - Factory or field programmable via Indala ProxSmith Programmer and Toolkit
• Warranty - Lifetime

FPCRD-SCSMP-0000-100 Specifications PDF

HID FlexCard Standard Card Ordering Guide