UN1A-16X8 InVid Tech 16 Channel NVR 100Mbps Max Throughput w/ Built-in 8 Port PoE - No HDD

Specifications

Streaming Video Inputs & Recording

• Maximum Number of IP Cameras - 16
• Number of built in PnP/PoE Switch Ports - 8
• Supported Live View/ Record Resolutions - 6MP / 5MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
• Sub-stream - Supported for recording, playback and live viewing
• Audio streaming - Supported from audio capable cameras
• Maximum FPS rate per camera - 30FPS Main stream; 30FPS Sub-stream Up to 480FPS total for 16 cameras
• Maximum Record Streaming Video Input Bandwidth (all cameras combined) - 100 Mb/s
• Recording Compression - Depends on IP Camera; typically H.264 for main stream, MJPEG for sub-stream
• Recording Modes - Continuous, Motion, Alarm, Motion+Alarm, Motion or Alarm
• Motion Detection - Camera Side, configurable from NVR for KNC-p3 Omni IP Series Cameras
• Schedule Period - Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
• Pre- and Post- Event Recording - Pre-record 0~30 seconds; post record 5s~10 minutes
• Built in network switch port speed - 10/100 Mb/s each port
• KT&C Omni-IP 'hands free Plug and Play' Cameras Fully Supported - Any OMNI-IP models (IPCAM protocol). See camera datasheets for details
• Third Party Cameras Supported (requires traditional configuration and setup) - Onvif; Acti, Arecont, Axis, Bosch, Brickcom, Canon, Hikvision, Hunt, Panasonic, Pelco, Samsung, Sanyo, Sony, Vivotek, Zavio

Local Live Presentation of Streaming Video/Audio

• Local Display Main Monitor Outputs HDMI- HDMI 60Hz: 1920x1080, 1600x1200, 1280x1024, 1280x720, 1024x768 VGA 60Hz: 1920x1080P, 1600x1200, 1280x1024, 1280x720, 1024x768
• Camera Display Layouts- 1, 2x2, 1+5, 1+7, 3x3, 4x4
• Automatic Stream Selection- Single camera view and 720p 2x2 at main stream resolution; Automatic switching to sub-stream resolution in other multi-view displays to conserve CPU capacity and maintain parity between per-camera screen area and image size
• Audio Output (requires audio equipped cameras)- 1-ch Line Level, RCA (Linear, 1KΩ)

Playback of Recorded Video/Audio

• Supported Playback Resolutions - 6MP / 5MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
• Local Display Playback Maximum Video Bandwidth (all cameras combined) - ~8Mb/s nominal
• Nominal Local Playback Capability - 16 channels @ 4CIF; 12 Channels 720p; 6 channels 1080p (actual playback depends on decoding load which varies based on settings for recorded video bandwidth restrictions, resolution, image quality, FPS rate, compression effi
• Playback search modes - Time/Date; Manual Tags; Smart Search for motion events from recorded video; Event (Motion/Alarm/VCA)
• Playback Controls - Play; Pause; Forward/Reverse; speed control for single~1.8~xMax (256x) Slide bar with overview of record type and snapshot display from slider position
• Digital Zoom During Playback - CSupported on Local Displays and CMS

Local Hard Drives and Other Storage - Supported on Local Displays and CMS

• Number of Internal Hard Drives- Up to 2 SATA HDD; up to 6TB each for 12TB maximum
• Redundant Record - Yes
• S.M.A.R.T - With extensive statistics, alarms, on demand tests and reporting
• Record to - HDD, NAS or SAN
• Archive to - USB, HDD, NAS or SAN

Local Plug and Play Camera Network Support

• Integral PoE Switch- 8 ports 10/100 Mb/s
• Camera Network Security - Option to enable pass thru access from LAN/WAN to cameras or to isolate camera network from LAN/WAN for increased security
• PoE Type- 802.3af 15W max per port
• Total Power Budget- 100W all ports
• PnP Network Support- Integral DHCP function with address-per-port initial assignment (Using KT&C KNC-p3 & KNC-p4 Omni-IP Series cameras connected to internal PnP PoE switch ports)

Remote Viewing and Local/Remote Configuration

• Built in Web Server Interface - Live view, playback and configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension installed)
• CMS- PC and MAC Client supports multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
• Mobile Apps- iOS and Android supported ; live 1 & 4 camera views; single camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, is available
• User Rights Control- Per user-per camera for multiple functions
• Event Logging- Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
• Firmware Upgrade- From USB or remotely
• Backup/Restore Configuration- For NVR settings and for IP Camera settings; from USB or remotely

Network and Other Interfaces

• LAN/WAN Network Port- One 10/100/1000Mb/s RJ-45 port
• Connection of non-PnP IP cameras - Supported
• Remote Monitoring Output Maximum Bandwidth - 80Mb/s
• Maximum number of remote connections - 128
• DST/NTP- Supported; choice of time zone, NTP server, DST start/end/offset
• Port Mapping/uPnP - Automatic port forwarding/redirection using uPnP on routers with this capability
• Serial Interfaces - 1xRS-485
• USB 2.0 Interfaces - 1 USB2.0 front; 1 USB 3.0 rear
• Audio Input - 1 RCA

General Mechanical and Environmental

• Power Input - 100~240VAC, 47~63Hz
• Continuous Power Consumption - 200W including PoE
• Operating Temperature - 14°F ~ 131°F (-10°C ~ +55°C)
• Operating Humidity Range - 10% ~ 90%
• Cooling Fan - 1, in power supply
• Size - 17.52" x 11.42" x 1.77"
• Weight (without hard drives or ODD)- 5.5lb (2Kg) NVR only allow ~1.4 lb. per HDD
• Certifications - FCC, CE, RoHS