The Endeavor 6 & 10kVA Tower Series is yet another option for applications that require the best protection available. This feature-rich, single-phase, true online UPS has been designed to support large loads for network data centers, remote network closets, education networks, and other mission-critical applications.

Endeavor 6 & 10kVA Tower Standard Features

• Automatic Voltage Regulation (AVR)
• Five surge and battery-protected outlets (1000/1350VA models)
• Five surge-only outlets for protection of non-critical accessories (1000/1350VA models)
• 6-foot power cord with right-angle NEMA 5-15P (550VA/850VA/1000VA/1350VA models)
• Input circuit breaker protection

Feature-rich Design

• True online, double-conversion topology
• Single-phase, 208 input, with configurable output voltages: 120/208/220/230/240VAC
• Isolation transformer for full-load 120VAC support
• Higher output power factor (208 = 90%)
• 1.0 (with 20 internal batteries)
• 0.9 (with 18 internal batteries)
• 0.8 (with 16 internal batteries)
• Smaller, compact case design
• Real-time LCD display
• EPO port standard
• Simultaneous communication ports (USB/RS232/SNMP Option Card)
• Extended runtime via external battery packs
• Internal Maintenance Bypass

APPLICATIONS

• High-Density Installations
• Enterprise Network Installations
• Network Corporate Servers
• Telecom/VoIP Systems
• Extended Runtime

Specifications

General Features

• Maximum Power Capacity - 10000VA
• Default Watt Capacity* - 10000 Watts
• Power Factor* - 1.0
• Topology - Double-conversion on-line
• Input Type - Hardwire Terminal Block (L-N-G)
• Output Type - Hardwire Terminal Block (L-N-G)

Input

• Number of Phases - Single - Phase
• Nominal Voltage - 208VAC ~ 240VAC
• Acceptable Input Voltage - 0 – 300VAC
• Voltage Range - 110 – 300VAC ±3%
• Power Factor Correction - ?99% at Full Load
• Frequency Limits - 50/60Hz ±4Hz
• Low Voltage Transfer Point - 110VAC ±3% at 0-60% Load 176VAC ±3% at 60%-100% Load
• High Voltage Transfer Point - 120VAC ±3% at 0-60% Load 186VAC ±3% at 60%-100% Load
• Input Protection - Re-settable Circuit Breaker and Fuse

Output: Online

• Nominal Range - 240VAC (208/230/240 configurable) / 120VAC
• Voltage Regulation - ±2%
• Frequency Range - 50/60Hz ±4Hz
• Efficiency (Online Mode) - ?89% (at Full Load)

Output: Battery

• Waveform Type - True Sine Wave
• Nominal Voltage - 240VAC (208/230/240 configurable) / 120VAC
• Voltage Regulation - ±2%
• Frequency Range - 50/60Hz +/-0.1Hz (unless synchronized to utility)
• Voltage T.H.D. - ? 2% @ 100% Linear Load; ? 8% @ 100% Non-linear Load
• Dynamic Response - 200ms to normal vootage±2%
• Transfer Time - 0 ms
• Slew Rate - 60V/ms
• Crest Factor - 2.6:1 max
• Overload Capacity - ?100.1% - ?110% for 30 secs. / ?110.1% - ?130% for 10 secs. / ?130.1% for 1 sec

Battery

• System Voltage - 240VDC
• Battery Type - Sealed, Non-Spillable, Maintenance Free, Valve Regulated Lead Acid (VRLA)
• Internal Battery Quantity (Default) - 20
• Runtime: Full Load (minutes) - 3 minutes
• Runtime: Half Load (minutes) - 9 minutes

Surge Protection

• Surge Energy Rating - 880J
• Surge Current Capability - 1000A
• Surge Response Time - 8us
• Surge Voltage Let-through - 2KV

Environmental

• Audible Noise at 1m (3-ft.) - <55dB at 1 meter
• Operating/(Storage) Temperature - 0°C ~ +40°C / (-15°C ~ +60°C)
• Relative Humidity - 10 – 95% Non-condensing
• Altitude - <1000m to Full Power (De-rate by 1% for every 100m above 1000m)

Physical

• Net Size – LxWxH (mm) - 22.1” x 9.8” x 32.5” (561.1 x 250 x 826.5)
• Shipping Size – LxWxH (mm) - 28.5” x 14.6” x 37.0” (725 x 370 x 940)
• Net Weight – (Kgs.) - 274.5 lbs. (124.5)
• Shipping Weight (Kgs.) - 309.8 lbs. (140.5)

Regulatory

• Safety and Approvals - cTUVus, CE, RoHS2
• EMC Verification - FCC Class A
• Warranty - 3 years parts and labor

ED10KTF Specifications PDF