UCT2NBWA000A Videotec 25mm 30FPS @ 336 X 256 Outdoor Uncooled Thermal Analog Security Camera 24VAC with Wiper

The PTZ ULISSE COMPACT THERMAL camera offers an exceptional integrated solution, for effective monitoring even in complete darkness or in extreme environmental conditions, fog, rain, smoke.
Constant and reliable non-stop monitoring of outdoor areas and infallible system for detecting events and presences.

Specifications

General

• Constructed from aluminium and tecnopolymer
• Epoxypolyester powder painting, RAL9002 colour
• Germanium window for thermal camera
• Easy installation thanks to the self-centring connector
• Zero backlash
• Quick configuration and setup
• Dynamic positioning control system
• 16-characters string for zone and preset titling
• Functions: Autopan, Preset, Patrol, Tour (maximum 3), Autoflip

Mechanical

• Cable glands: 2xM16, 2xM12
• Horizontal rotation: 360^°, continuous rotation
• Vertical rotation: from -90^° up to +90^°
• Horizontal speed (variable): from 0.1^° up to 200^°/s
• Tilt speed (variable): from 0.1^° up to 200^°/s
• Accuracy of preset positions: 0.05^°
• Unit weight: 12.5kg (28lb)

Housing's window

• Glass window extra clear
• Thick: 3mm (0.1in)
• Germanium window
• Thick: 1.5mm (0,06in)
• External treatment: antiscratch (Hard Carbon Coating - DLC), antireflection
• Internal treatment: antireflection
• Spectral range: from 7.5μm up to 14μm
• Medium transmittance (from 7.5μm up to 11.5μm): 91.2%
• Medium transmittance (from 11.5μm up to 14μm): 80.9%

Electrical

• Supply voltage/Current consumption:
• 230Vac, 0.4A, 50/60Hz
• 24Vac, 4A, 50/60Hz
• 120Vac, 0.8A, 50/60Hz
• Power consumption
• 40W: P&T static, heating switched off
• 60W: P&T in motion, heating switched off
• 125W: peak at start-up, heating switched on
• Cables input section: from 1.5mm™ (16AWG) up to 0.75mm™ (19AWG)
• Cables signal section: from 1.5mm™ (16AWG) up to 0.14mm™ (30AWG)
• Video line: coaxial cable (1Vpp, 75Ohm)
• I/O alarm card
• Alarm inputs: 6
• Relay outputs: 2 (2A, 30Vac/60Vdc max)

Serial communications

• Configuration through OSM
• Half-duplex serial RS-485 interface, full-duplex RS-422 and daisy-chain architecture
• Firmware updating from console in remote mode (PELCO D, VIDEOTEC MACRO)
• Up to 1023 units, addressable by means of dip-switches
• Serial communication protocol: AMERICAN DYNAMICS, ERNITEC, PANASONIC, PELCO D, VIDEOTEC MACRO
• Maximum number of presets for protocol
• AMERICAN DYNAMICS: 95*
• ERNITEC: 250
• PANASONIC: 250
• PELCO D: 99*
• VIDEOTEC MACRO: 250
• *250, from OSD only (On Screen Display)

Environment

• For installation indoors and outdoors
• Operating temperature (with heater): from -40^°C (-40^°F) up to +60^°C (140^°F)
• Wind resistance
• Operational: up to 160km/h
• Stationary: up to 210km/h
• Surge immunity: up to 2kV line to line, up to 4kV line to earth (Class 4)
• Relative humidity: from 10% up to 95% (no condensation)

Certifications

• Electrical safety (CE): EN60950-1, IEC60950-1
• Electromagnetic compatibility (CE): EN610000-6-4, EN50130-4, EN55022 (Class A), EN61000-6-4, FCC Part 15 (Class A)
• Outdoor installation (CE): EN60950-22, IEC60950-22
• IP protection degree: EN60529 (IP66)
• UL certification: cULus Listed (TYPE 4X)
• EAC certification

UCT2NBWA000A Specifications PDF