UPT2QVJA000E Videotec 3.5-98mm 28x Optical 550TVL Outdoor IR Day/Night PTZ Analog Security Camera 24VAC with Wiper and Brackets for UPTIRN

ULISSE PTZ camera unit ensures maximum video surveillance coverage in all outdoor environments, even the most difficult.ﾠ ﾠThe accurate top-mount configuration guarantees long-range vision and continuous horizontal axis rotation, combining high speed with absolute tracking accuracy, both in manual mode and in patrol mode.

Specifications

General

• Constructed from aluminium and tecnopolymer
• Epoxypolyester powder painting, RAL9002 colour
• Top mount (OTT)
• Transmission through toothed belt
• Slip-ring
• Electronic limit switches
• Simplified installation thanks to the connector and easy replacement on-site
• Zero backlash
• Configuration of telemetry protocol parameters through dip-switch for RS-485

Mechanical

• Cable glands: 3xM16
• Horizontal rotation: 360^º, continuous rotation
• Vertical rotation: from -40^º up to +90^º
• Horizontal speed (variable): from 0.02^º/s up to 100^º/s (from 0.02^º/s up to 40^º/s, with LED illuminators)
• Tilt speed (variable): from 0.02^º/s up to 40^º/s (from 0.02^º/s up to 30^º/s, with LED illuminators)
• Internal usable area: See drawings
• Accuracy of preset positions: 0.02^º
• Unit weight: 16.3kg (36lb) (16.8kg (37lb), with LED illuminators bracket)

Electrical

• Supply voltage/Current consumption:
• 230Vac, 0.4A, 50/60Hz
• 24Vac, 4A (8A with LED illuminators), 50/60Hz
• 120Vac, 0.8A, 50/60Hz
• Power consumption:
• 100W (150-190W max with LED illuminators in 24Vac)
• 24W, P&T static, heating switched off
• Version with integrated camera:
• 26.5W, P&T static, heating switched off
• Cables input section:
• 0.75mm² (18AWG), 120Vac or 230Vac
• 1.5mm² (16AWG), 24Vac
• Cables signal section: from 0.14mm² (26AWG) up to 0.5mm² (20AWG)
• Housing standard heater: 24Vac, 20W max
• 4 alarm inputs: 10-35Vdc (2 alarm inputs, with LED illuminators)
• 2 dry contacts: 50Vdc max or 30Vac @ 1A (1 dry contact, with LED illuminators)
• Video line: coaxial cable (1Vpp, 75 Ohm)
• Camera power supply: 12Vdc (800mA)
• Power supply to the lens: 6-15Vdc (200mA max)
• Zoom lens controller: polarity inversion and common wire
• Functions: Autopan, Preset, Patrol
• Maximum number of presets for protocol: 250 (VIDEOTEC MACRO)
• 15 characters string for Area and Preset titling
• Configuration through OSM

Communications

• RS-232 interface for firmware update
• 2-ports RS-485 for daisy chain configuration
• Addressable through dip-switch up 255 units

Protocols

• Configuration of telemetry protocol parameters through dip-switch
• AMERICAN DYNAMICS, PANASONIC, PELCO D, VIDEOTEC MACRO, VISTA
• AMERICAN DYNAMICS, PANASONIC, PELCO, VISTA are registered trademarks.
• The product may be interfaced with devices not manufactured by VIDEOTEC. It is possible that the interface protocols have changed or are in a different configuration from earlier tested units by VIDEOTEC. VIDEOTEC recommends a test prior to installation. VIDEOTEC will not be liable for any installation costs or lost revenues in the event a compatibility problem will occur.

Environment

• For installation indoors and outdoors
• Operating temperature
• With heater: from -20^ºC (-4^ºF) up to +60^ºC (140^ºF)
• With reinforced heater: from -30^ºC (-22^ºF ) up to +60^ºC (140^ºF)
• Wind resistance (without LED illuminators):
• Operational: up to 160km/h
• Stationary: up to 210km/h
• Surge immunity: up to 2kV line to line, up to 4kV line to earth (Class 4)

Certifications

• Electrical safety (CE): EN60950-1, IEC60950-1
• Electromagnetic compatibility (CE): EN50130-4, EN55022 (Class A), EN610000-6-3, FCC Part 15 (Class B)
• Outdoor installation (CE): EN60950-22, IEC60950-22
• Photobiological safety (CE): EN62471 (LED illuminators)
• IP protection degree: EN60529 (IP66)
• Salty fog resistance: EN50130-5, EN60068-2-52
• UL certification: cULus Listed (TYPE 4X) (not for thermal cameras version)
• EAC certification

UPT2QVJA000E Specifications PDF