AL400ULM Altronix 5 Output PTC Power Supply/Charger w/ Fire Alarm Disconnect and Enclosure 12VDC @ 4 Amp or 24VDC @ 3 Amp

AL400ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.

Specifications

Input

• Voltage Range - 115VAC, 60Hz.
• Fusing - Varies, see Reference Chart.

Outputs

• Voltage - 12VDC or 24VDC, see Reference Chart.
• Current - Varies, depending on the model.
• Protection - PTC 2.5A.
• Other - Overvoltage protection. Filtered and regulated outputs.

Back-up Battery (not included)

• Capacity - 12AH / 12VDC
• Type - Sealed lead acid or gel type.
• Fuse Rating - 15A @ 32VDC. AL600ULM(X) does not have a battery fuse.
• Failover - Upon AC loss, instantaneous.

Supervision

• AC Failure - Form "C" contacts.
• Battery - Form "C" contacts.

Indicators (LED)

• Input - 115VAC is present.
• DC Output - Powered.
• Battery - Discharged or not connected.
• Power and Input - Individual LEDs indicate outputs are. triggered (relays energized).

Agency Listings

• UL
  • UL294 - Access Control System Units
• cUL
  • CSA C22.2 No.205 - Signal Equipment
• UL1481 - Fire Protective Signaling Systems
• CSFM - California State Fire Marshall Approved.
• UL603 - Burglar Alarms Systems
• UL1069 - Hospital Signaling andNurse Call Equipment

Physical and Environmental

• Dimensions (H x W x D) - 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm).
• Product Weight - 7.6 lbs. (3.45 kg)
• Shipping Weight - 8.6 lbs. (3.9 kg)
• Temperature
  • Operating - 0™C to 49™C (32™F to 120™F).
  • Storage - -20™C to 70™C (-4™F to 158™F).
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 12VDC: 25, 24VDC: 37

AL400ULM Specifications Sheet

AL400ULM Installation Manual