AL175ULX Altronix 2 Output Power Supply/Charger w/ Fire Alarm Disconnect and Enclosure 12VDC or 24VDC @ 1.75 Amp

Altronix AL175ULX is a Two (2) Output Switching Power Supply/Charger that converts a 115VAC 60Hz input, into two (2) individually PTC protected 12VDC or 24VDC outputs.

Specifications

Input

• Voltage - 115VAC, 60Hz, 0.6A.
• Trigger - Access control trigger input.

Outputs

• Two (2) Class 2 Rated power-limited outputs.
• Fail-Safe/Fail-Secure lock output (switched).
• Auxiliary power output (unswitched).
• Voltage - 12VDC or 24VDC selectable.
• Current - 1.75A continuous max.
• Other - Short circuit and thermal overload protection.

Back-up Battery (not included)

• Type - Sealed lead acid or gel type.
• Failover - Upon AC loss, instantaneous.

Fire Alarm Disconnect

• Supervised - Latching or non-latching.

Supervision

• AC Failure - Form "C" contacts.

Indicators (LED)

• Input - Input voltage is present.
• DC Output - Powered.

Agency Listings

• UL - UL294 (Access Control).
• cUL - CSA Standard C22.2 No.205-M1983, Signal Equipment.
• CSFM - CSFM Approved.

Physical and Environmental

• Dimensions (H x W x D) - 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm) Enclosure accommodates up to two (2) 12VDC/7AH batteries.
• Product Weight - 8.4 lbs. (3.81 kg).
• Shipping Weight - 9.4 lbs. (4.26 kg).
• Temperature
  • Operating - 0°C to 49°C (32°F to 120°F).
  • Storage - -20°C to 70°C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%.
• BTU/Hr. (approx.)
  • 12VDC - 11 BTU/Hr.
  • 24VDC - 22 BTU/Hr.

AL175ULX Spec Sheet

AL175ULX Installation Manual